HP Pavilion ze4100 Service Manual - Page 90
Removing the Switchboard PCA, Required Equipment, Removal Procedure
View all HP Pavilion ze4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Removing the Switchboard PCA (User-Replaceable) Note This section applies only to HP Pavilion 5300 and 5200, HP nx9010, and Compaq Presario 2500 models. Required Equipment • #1 Phillips screwdriver. Removal Procedure 1. Unplug the AC adapter, if present, and then remove the battery. 2. Remove the keyboard cover (page 2-12). 3. Disconnect the 2-wire cable that connects the switchboard PCA to the display lid switch. 4. Remove the two M2.5×4.0 mm screws that secure the switchboard PCA to the top case. 5. Gently lift up on the rear right edge of the switchboard PCA to disconnect the PCA from the motherboard. 6. Remove the switchboard PCA. Figure 2-14. Removing the Switchboard PCA HP Pavilion 5300 and 5200, HP nx9010, and Compaq Presario 2500 Models Service Manual Removal and Replacement 2-19