HP Pavilion zt3100 HP and Compaq Notebook Series - Bluetooth Getting Started G - Page 1

Bluetooth Getting Started Guide The Bluetooth integrated device provided with your computer comes with the required software preloaded. However, before you can use your local Bluetooth device, the software must be installed and configured. The Software Setup application included with your computer will assist you in installing the Bluetooth software. After the software has been installed, the Bluetooth Setup Wizard can be used to facilitate the configuration of service and security features of your wireless product. During the initial configuration, you can also locate other devices that provide a particular service and configure access to those services. Software Installation If your computer is equipped with the Bluetooth integrated device, you must install the Bluetooth software that has been preloaded in the image of your computer. To install the software for your Bluetooth device, perform the following steps: 1. Select Start > All Programs > Software Setup. 2. When the Software Setup Welcome window is displayed, select Next. 3. Select the check box next to the Bluetooth software driver to enable the software for installation and select Next. 4. Select Finish to complete the installation and to reboot the computer. ✎ A software item that is enabled to install via Software Setup will have a check mark in the check box next to it. Deselect all items that you do not want to install before selecting Next to continue with installation of the Bluetooth software. Proceed to the "Hardware Enabling" section.