HP Photosmart 1218 HP Photosmart 1000 Printer - (English) User Guide - Page 19
Load paper in the photo, Load a single envelope, photo tray.
View all HP Photosmart 1218 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Loading paper To... Follow these steps... Load paper in the photo tray Use the printer's photo tray to print on 4 x 6 inch (102 x 152 mm) photo paper. When you use the photo tray, you can leave your regular paper in the paper tray. 1. On the output tray, move the slider (visible through the output tray) toward you (away from the inside of the printer) until it stops. This disengages the photo tray. 2. Lift the output tray. 3. Load paper in the photo tray with the print side down. If you are using tabbed paper, feed or place the tabbed paper into the printer so the tab feeds in last. 4. Lower the output tray to its original position. 5. On the output tray, move the slider away from you (toward the inside of the printer) until it stops against the edge of the paper. This engages the photo tray. Note: When you are finished using the photo tray, disengage it so the printer will use the paper in the paper tray. Load a single envelope Use the printer's single-envelope slot to print one envelope at a time. • Load the envelope into the single-envelope slot with the address side down and the flap on the left. Slide the envelope in until it stops. Tip: See the picture on the printer. www.hp.com/photosmart 13