HP Photosmart 7345 HP Photosmart 7350 and 7345 printers - (English) Basic Guid - Page 42
printer problems - windows 10
View all HP Photosmart 7345 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Problem Possible cause Solution Windows PC only When I connect a USB cable between the printer and my computer, an UNKNOWN DEVICE message appears. Static electricity has built up in the cable between your computer and printer. OR You may have a defective USB cable. OR Your USB cable may not be connected properly. OR The software could not identify the printer; the printer-USB connection may be defective. Try the following: 1 Disconnect the USB cable from your printer. 2 Disconnect the power cord from the printer. 3 Wait approximately 10 seconds. 4 Plug the power cord back into the printer. 5 Plug the USB cable back into the USB port on the back of the printer. 6 If UNKNOWN DEVICE continues to appear in the New Hardware Wizard dialog box, check www.hp.com for updates or contact HP Support and Services. See the Software Setup & Product Support booklet that came with your printer for contact information. printer problems Problem Printing is very slow. (continued on next page) Possible cause Solution Your computer may have less than the recommended system requirements. Check the amount of free RAM (memory) and the processor speed of your computer. See the specifications section of the HP Photosmart Printer Help for system requirements. Too many software Close all unnecessary software programs may be running at programs. the same time. 38 basics guide