HP Presario 1000 HP Compaq Business Notebook nx7000/Compaq Presario Widescreen - Page 114
Route the two antenna cables, out of the hole in the system
View all HP Presario 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Removal and Replacement Procedures 6. Turn the notebook top side up with the rear panel facing forward. 7. Release the ZIF connector 1 to which the TouchPad cable is attached and disconnect the TouchPad cable 2 from the system board. 8. Route the two antenna cables 3 out of the hole in the system board. Disconnecting the TouchPad Cable and Routing the Wireless Antenna Cables Maintenance and Service Guide 5-31
Removal and Replacement Procedures
Maintenance and Service Guide
5–31
6. Turn the notebook top side up with the rear panel facing
forward.
7. Release the ZIF connector
1
to which the TouchPad cable is
attached and disconnect the TouchPad cable
2
from the
system board.
8. Route the two antenna cables
3
out of the hole in the system
board.
Disconnecting the TouchPad Cable and Routing the Wireless
Antenna Cables