HP Presario 12XL Models XL300, XL300A, and XL300B - Maintenance & Service - Page 71
Solving Printer Problems, Problem, Probable Cause, Solutions, On Line
View all HP Presario 12XL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Presario 1200XL Series Model XL300, XL300A, and XL300B Solving Printer Problems If you experience problems printing, run a printer self-test. Refer to the documentation provided with your printer for instructions. If the self-test fails, the problem is printer-specific. Refer also to the printing section of your application documentation. Solving Printer Problems Problem Probable Cause Printer will not turn on. The signal cable may not be connected properly, or the printer is unplugged. Printer will not print. Printer is not turned on, or is offline. The device drivers for the application are not installed. The printer is set up for a network, but is not connected to the network. Printer cable is too long, unshielded, or defective. Paper tray is empty. Printer prints garbled Correct printer drivers are not information. installed. Cable is not connected properly. Cable is defective. Solution(s) Ensure that the signal cable is properly connected and that the power cord is connected to the electrical outlet. Turn the printer on and set it to On Line. Refer to the printer documentation to install the correct printer driver. Connect the printer to the network. Replace the cable. Fill the paper tray with paper and set the printer to On Line. Refer to the printer documentation to install the correct printer driver. Ensure that the printer signal cable is properly connected to the Notebook. Replace the printer cable and retest. 34 TROUBLESHOOTING PRESARIO NOTEBOOK MAINTENANCE AND SERVICE GUIDE 1200XL SERIES