HP Presario CQ70-100 HP G70 Notebook PC Compaq Presario CQ70 Notebook PC - Mai - Page 50
Loosen the Phillips PM2.0X5.0 captive screw, The WLAN module
View all HP Presario CQ70-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Removal and replacement procedures Remove the WLAN module: 1. Remove the WLAN module cover: a. Loosen the Phillips PM2.0X5.0 captive screw 1 that secures the WLAN module component cover to the computer. b. Lift the right side of the WLAN module cover 2, swing it to the left, and remove it 3. The WLAN module cover is included in the Plastics Kit, spare part number 489112-001. 2. Disconnect the two antenna cables 1 from the wireless module. ✎ The black WLAN antenna cable is connected to the WLAN module "Main" terminal. The white WLAN antenna cable is connected to the WLAN module "Aux" terminal. 3. Remove the two Phillips PM2.0×4.5 screws 2 that secure the WLAN module to the computer. (The edge of the module opposite the slot rises away from the computer.) 4. Remove the WLAN module 3 by pulling the module away from the slot at an angle. ✎ WLAN modules are designed with a notch 4 to prevent incorrect installation. Reverse this procedure to install the WLAN module. 4-14 Maintenance and Service Guide