HP Presario CQ71-100 Compaq Presario CQ71 Notebook PC and HP G71 Notebook PC - - Page 65
Lift the bracket, straight up to remove it from the hard drive.
View all HP Presario CQ71-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
4. Use the 2 Mylar tabs to slide the hard drive (2) to the right until it disconnects from the system board. 5. Use the 2 Mylar tabs to lift the hard drive straight up (3), and remove it from the hard drive bay. 6. If it is necessary to replace the hard drive bracket, remove the four Phillips PM3.0×4.0 screws (1) that secure the hard drive bracket to the hard drive. 7. Lift the bracket (2) straight up to remove it from the hard drive. Reverse this procedure to reassemble and install the hard drive. Component replacement procedures 57
4.
Use the 2 Mylar tabs to slide the hard drive
(2)
to the right until it disconnects from the system
board.
5.
Use the 2 Mylar tabs to lift the hard drive straight up
(3)
, and remove it from the hard drive bay.
6.
If it is necessary to replace the hard drive bracket, remove the four Phillips PM3.0×4.0 screws
(1)
that secure the hard drive bracket to the hard drive.
7.
Lift the bracket
(2)
straight up to remove it from the hard drive.
Reverse this procedure to reassemble and install the hard drive.
Component replacement procedures
57