HP Presario V3300 Compaq Presario V3000 Notebook PC Maintenance and Service Gu - Page 169
straight up to remove it from the, Remove the num lock light
View all HP Presario V3300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
Removal and Replacement Procedures 2. Disconnect the USB board cable 1 from the system board. 3. Remove the silver Phillips PM2.5×5.0 screw 2 that secures the USB board to the computer. 4. Lift the USB board 3 straight up to remove it from the computer. 5. Remove the num lock light 4 from the clip in the base enclosure Removing the USB Board Reverse the above procedure to install the USB board. Maintenance and Service Guide 5-59
Removal and Replacement Procedures
Maintenance and Service Guide
5°59
2. Disconnect the USB board cable
1
from the system board.
3. Remove the silver Phillips PM2.5×5.0 screw
2
that secures
the USB board to the computer.
4. Lift the USB board
3
straight up to remove it from the
computer.
5. Remove the num lock light
4
from the clip in the base
enclosure
Removing the USB Board
Reverse the above procedure to install the USB board.