HP Pro 2110 Illustrated Parts and Service Map - HP Pro 2110 Small Form Factor - Page 3

Computer Setup Basic system information regarding system information, setup, power management, hardware, and passwords is maintained in the Setup Utility held in the system ROM. The Setup Utility is accessed by pressing the F10 key when prompted (on screen) to do so during the boot sequence. If the screen prompt opportunity is missed, a restart will be necessary... Computer Setup Menu Heading Option / Description Main System Information Lists the following main system specifications: • Processor Type • Processor Speed • CPUID/PatchID • Cache Size • Memory Size • Integrated MAC • System BIOS System IDs Allows you to view or change system ID information: • Product Name (press Enter to change) • Serial Number (press Enter to change) • UUID (press Enter to change) • SKU Number (press Enter to change) • Family Name (view only) • Asset Tag Number (press Enter to change) • Feature Byte (press Enter to change) • Build ID (press Enter to change) Set Time and Date Allows you to set system time and date. SATA Port 1 SATA Port 2 SATA Port 3 SATA Port 4 For each allows you to: • Run HDD self-test for selected channel: SMART Status Check, Short Self-Test, Extended Self-Test • View vendor, size, and firmware SATA Controller Allows you to disable/enable the SATA Controller. Onboard FDC Controller Disable/enable the diskette drive controller. Drive A (view only) Halt On Allows you to set POST error behavior to: all errors, no errors, all but keyboard. POST Delay Allows you to set POST delay to 0, 5, 10, 15, or 30 seconds Advanced Execute Disable Disables/enables hardware DEP function. Bit Intel Virtualiza- Allows you to enable/disable the processor's Virtualization tion Tech Technology feature. Init Display First Allows you to set primary display device to PCI slot, OnChip VGA, or PCIEx. MAX DVMT Allocation Allows you to specify the DVMT/system memory allocated for video memory to 128MB, 256MB, or Max. Onboard HD Audio Allows you to disable/enable onboard HD audio. OnChip USB Controller Disables/enables the universal host controller interface for USB (Universal Serial Bus). USB Legacy Sup- Disable/enable (USB keyboard, mouse, and flash media). port Onboard LAN Disable/enable onboard LAN controller. Onboard LAN Boot ROM Disable/enable the boot ROM of the onboard LAN chip. Onboard Serial Allows you to select: Disabled, 3F8/IRQ4, 2F8/IRQ3, 3E8/ Port 1 IRQ4, or 2E8/IRQ3. Boot ESC Boot Menu Disables/enables ESC key access to Boot menu at startup. F9 Diagnostics Disable/enable F9 Boot Menu prompt on the logo screen F10 Setup Prompt Disable/enable F10 Setup prompt on the logo screen. F11 Recovery Disables/enables F11 Recovery and provides the option of showing the F11 Recovery prompt message on the logo screen. Choose from the following: Disabled, Enabled no prompt, Enabled and prompt. F12 Boot from Disables/enables the F12 Boot from LAN prompt message on LAN Prompt the logo screen. Hard Disk Boot Seq. Allows you to specify the order of attached hard drive devices (USB HDD or USB flash media). The first attached drive in the order has priority and is recognized as drive C. Optical Drive Boot Seq. Allows you to specify the order in which attached optical drives (including USB ODD) are checked for a bootable operating system image. Network Boot Seq. Allows you to specify the order in which network devices (including UP NIC cards) are checked for a bootable operating system image. First, Second, Allows you to specify which devices will boot in which Third, and Fourth sequence or to disable any of the four: removable, CDROM, Boot Device hard disk, or network. Set Supervisor Password Allows you to establish a password to enter Computer Setup BIOS Write Pro- Disables/enables BIOS upgrading. tection Power After AC Power Allows you to select system power loss behavior: Off, On, Loss Last State. Wake on PCI Disables/enables waking up from S5 by PCI device. Device from S5 RTC Resume Alarm Disables/enables RTC (real-time clock) alarm. Heading Option / Description PC Health Chassis Opened Allows you to disable/enable the chassis intrusion function Warning and clear the intrusion warning. System Fan Fail Disables/enables detection of system fan during POST. Check Smart Fan Func- Disables/enables Smart Fan functionality. Enabling optimizes tion fan control for best acoustic behavior. Current CPU Temperature View only Current System View only Temp Current CPU Fan View only Speed Current System View only Fan Speed Exit Save and Exit Allows you to save current settings and exit Computer Setup. Setup Discard Changes Allows you to exit Computer Setup without saving changes. and Exit Load Optimized Allows you to reset Computer Setup to factory defaults. defaults POST Error Messages • Default BIOS settings have been loaded due to BIOS update or checksum issue. Press to enter Setup. Otherwise, allow the PC to continue. • ERROR: System Fan Has Failed. Service PC to prevent damage to the system. Press to continue • ERROR: System Fan Has Failed. Service PC to prevent damage to the system. Press to continue • ERROR: Unsupported CPU installed. PC will automatically power down in a few seconds. • The machine cover has been removed since last system startup. Please ensure that any system access was authorized. Press to continue. • (HDD information displayed here): Hard disk failure is imminent. Please back up your hard disk and have it replaced! Press for Setup, to Continue • Warning: Changing setup options while resuming from Hibernate may cause your system to fail to resume. POST Audible Codes Beeps Meaning Recommended Action 1 short beep and 1 long beep Bad memory or Check that the memory modules have followed by a three second memory configura- been installed correctly and that proper pause tion error. modules are used. 2 short beeps and 1 long beep followed by a three second pause No graphics card installed or graphics card initialization failed. For systems with a graphics card: 1. Reseat the graphics card. Power on the system. 2. Replace the graphics card. 3. Replace the system board. For systems with integrated graphics, replace the system board. 3 short beeps and 1 long beep followed by a three second pause CPU configuration error or invalid CPU detected before graphics card initialized. 1. Upgrade the BIOS to proper version. 2. Change the processor. 1 short beep followed by a No optical drive one second pause found. 1. Check cable connections. 2. Run the Computer Setup utility and ensure the device port is enabled. 2 short beeps followed by a No CD found. three second pause 1. Check the type of drive that you are using and use the correct media type. 2. Replace the CD with a new one. 3 short beeps followed by a three second pause Flashing not ready (missing utility or BIOS image file, etc.) Upgrade the BIOS to proper version. 4 short beeps followed by a three second pause Flashing operation has failed (checksum error, corrupted image, etc.) 1. Verify the correct ROM. 2. Flash the ROM if needed. 3. If an expansion board was recently added, remove it to see if the problem remains. 4. Clear CMOS. 5. If the message disappears, there may be a problem with the expansion card. 6. Replace the system board. 5 short beeps followed by a BIOS recovery was No action required. three second pause successful HP Pro 2110 Illustrated Parts & Service Map, SFF chassis 621941-001 page 3