HP Pro 3130 Mini Illustrated Parts and Service Map - HP Pro 3130 Minitower PC - Page 3

Computer Setup Basic system information regarding system information, setup, power management, hardware, and passwords is maintained in the Setup Utility held in the system ROM. The Setup Utility is accessed by pressing the F10 key when prompted (on screen) to do so during the boot sequence. If the screen prompt opportunity is missed, a restart will be necessary... Computer Setup Menu Heading Option / Description Main System Time Allows you to set system time. System Date Allows you to set system date. System IDs Allows you to view or change the following by pressing Enter: Product name, serial number, UUID, SKU, Family name (view only), Feature byte, Build ID. Language Allows you to select the language. Floppy Diskette A Allows you to set to Disabled, 1.44 MB 3.5", Not Installed. 1st Drive 2nd Drive 3rd Drive* 4th Drive* Allow you to: Enable/disable port configuration, view capacity, transfer mode. Also allows you to run HDD self-test for selected channel: SMART status check, SMART short self test, SMART extended self test. System Information Allows you to view installed memory, memory banks 14, BIOS revision, core version. Advanced CPU Type View only. CPU Speed View only. Cache RAM View only. Cache RAM (L2) View only. Cache RAM (L3) Primary Video Adapter USB Ports SATA Controller SATA Controller Mode Onboard Audio Onboard LAN Onboard LAN Boot ROM Change Supervisor Password View only. Allows you to select boot display device when more than 2 video options are offered by system: Integrated (Onboard), PCI-E. Allows you to disable/enable individual USB ports. Allows you to disable/enable the SATA controller. If SATA Controller is enabled, allows you to set the mode to: IDE, AHCI, RAID. Allows you to set the onboard audio to: Enabled, Disabled, Auto. Allows you to disable/enable onboard LAN controller. Disable/enable the boot ROM of the onboard LAN chip. Allows you to establish, disable, or change the supervisor password. Power Boot Exit Change User Password Allows you to establish, disable, or change the user password. Only displays in a Supervisor password is set. Onboard Video Memory Size Allows you to set onboard video memory size to Enabled 32MB, Enabled 64 MB, Enabled 128MB (default). Onboard 1394 Allows you to enable/disable all 1394 ports. Default is enabled. DVMT/FIXED Mem- Allows you to specify the DVMT/system memory allo- ory cated for video memory to 128MB, 256 MB (default), Maximum DVMT. After AC Power Fail- Allows you to select system restart behavior after power ure loss: Stay off, Power on, Auto. XD (Execute Disable) Allows you to disable/enable the processor's XD feature. Default is enabled. Virtualization Tech- Allows you to enable/disable the processor's Virtualiza- nology tion Technology feature. Default is disabled. WOL in S5 Disables/enables limited Wake on LAN from S5. Note that the computer can only wake from S5 during a normal shutdown event. Default is disabled. Boot-time Diagnostic Disable/enable POST diagnostic messages display dur- Screen ing boot. (Boot Device Priority) 1st Boot Device, 2nd Boot Device, 3rd Boot Device, 4th Boot Device Allows you to set device group boot priority: CD-ROM group, Hard drive group, Floppy group, Network boot group. MS-DOS drive lettering assignments maybe apply after a non-MS-DOS operating system has started. Floppy Group Boot Specifies boot device priority within removable devices. Priority NOTE: This computer does not support floppy drives. CD-ROM Boot Prior- Specifies boot device priority within CD/DVD drives. ity Hard Drive Boot Pri- Specifies boot device priority within hard drives. ority Network Group Boot Specifies boot device priority within bootable network Priority devices. ESC: Boot Menu Allows you to enable/disable the option to press the ESC key to access the Boot menu during computer startup. Default is enabled. F9: Diagnostics Disables/enables the F9 Boot Menu prompt message on the logo screen. Default is enabled. F10: Setup Disables/enables the F10 Setup prompt message on the logo screen. Default is enabled. F11: Recovery Disables/enables the F11 Recovery prompt message on the logo screen. Default is enabled. F12: Boot from LAN Disables/enables the F12 Boot from LAN prompt message on the logo screen. Default is enabled. Exit Saving Changes Press Enter to exit saving changes. Exit Discarding Changes Press Enter to exit discarding changes. Load Setup Defaults Press Enter to load setup defaults. Discard Changes Press Enter to discard changes. Save Changes Press Enter to save changes. POST Error Messages • Default BIOS settings have been loaded due to BIOS update or checksum issue. Press to enter Setup. Otherwise, allow the PC to continue. • ERROR: System Fan Has Failed. Service PC to prevent damage to the system. Press to continue • ERROR: System Fan Has Failed. Service PC to prevent damage to the system. Press to continue • ERROR: Unsupported CPU installed. PC will automatically power down in a few seconds. • The machine cover has been removed since last system startup. Please ensure that any system access was authorized. Press to continue. • (HDD information displayed here): Hard disk failure is imminent. Please back up your hard disk and have it replaced! Press for Setup, to Continue • Warning: Changing setup options while resuming from Hibernate may cause your system to fail to resume. POST Audible Codes Beeps Meaning Recommended Action 1 short beep and 1 long beep Bad memory or Check that the memory modules have followed by a three second memory configura- been installed correctly and that proper pause tion error. modules are used. 2 short beeps and 1 long beep followed by a three second pause No graphics card installed or graphics card initialization failed. For systems with a graphics card: 1. Reseat the graphics card. Power on the system. 2. Replace the graphics card. 3. Replace the system board. For systems with integrated graphics, replace the system board. 3 short beeps and 1 long beep followed by a three second pause CPU configuration error or invalid CPU detected before graphics card initialized. 1. Upgrade the BIOS to proper version. 2. Change the processor. 1 short beep followed by a No optical drive one second pause found. 1. Check cable connections. 2. Run the Computer Setup utility and ensure the device port is enabled. 2 short beeps followed by a No CD found. three second pause 1. Check the type of drive that you are using and use the correct media type. 2. Replace the CD with a new one. 3 short beeps followed by a three second pause Flashing not ready (missing utility or BIOS image file, etc.) Upgrade the BIOS to proper version. 4 short beeps followed by a three second pause Flashing operation has failed (checksum error, corrupted image, etc.) 1. Verify the correct ROM. 2. Flash the ROM if needed. 3. If an expansion board was recently added, remove it to see if the problem remains. 4. Clear CMOS. 5. If the message disappears, there may be a problem with the expansion card. 6. Replace the system board. 5 short beeps followed by a BIOS recovery was No action required. three second pause successful HP Pro 3130 Illustrated Parts & Service Map, MT chassis 621944-001 page 3