HP Pro 3500 Micro Maintenance & Service Guide Pro 3400 3405 3410 3500 3505 - Page 87
On some models the connector label is SYS_FAN1., To install the fan, reverse the removal procedures.
View all HP Pro 3500 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
5. From the inside of the computer, disconnect the cable from the red/brown system board connector labeled SYS_FAN (1), pull the fan into the chassis until it clears the chassis lip, and then lift it out of the chassis (2). NOTE: On some models the connector label is SYS_FAN1. To install the fan, reverse the removal procedures. System Fan 77
5.
From the inside of the computer, disconnect the cable from the red/brown system board
connector labeled SYS_FAN
(1)
, pull the fan into the chassis until it clears the chassis lip, and
then lift it out of the chassis
(2)
.
NOTE:
On some models the connector label is SYS_FAN1.
To install the fan, reverse the removal procedures.
System Fan
77