HP ProBook 4340s HP Notebook User Guide - Linux - Page 68
Removing an optical disc, Tray-load, When the disc tray opens normally
View all HP ProBook 4340s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Removing an optical disc Tray-load There are 2 ways to remove a disc, depending on whether the disc tray opens normally or not. When the disc tray opens normally 1. Press the release button (1) on the drive bezel to release the disc tray, and then gently pull out the tray (2) until it stops. 2. Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces. NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it. 3. Close the disc tray and place the disc in a protective case. 58 Chapter 7 Drives
Removing an optical disc
Tray-load
There are 2 ways to remove a disc, depending on whether the disc tray opens normally or not.
When the disc tray opens normally
1.
Press the release button
(1)
on the drive bezel to release the disc tray, and then gently pull out
the tray
(2)
until it stops.
2.
Remove the disc
(3)
from the tray by gently pressing down on the spindle while lifting the outer
edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.
NOTE:
If the tray is not fully accessible, tilt the disc carefully as you remove it.
3.
Close the disc tray and place the disc in a protective case.
58
Chapter 7
Drives