HP ProBook 4341s Getting Started HP Notebook - Page 51
Align the notched edge, only. Do not touch the components on the memory module.
View all HP ProBook 4341s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
b. Grasp the edge of the memory module (2), and then gently pull the memory module out of the memory module slot. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. To protect a memory module after removal, place it in an electrostatic-safe container. 6. Insert a new memory module: CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. a. Align the notched edge (1) of the memory module with the tab in the memory module slot. b. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module (2) into the memory module slot until it is seated. Adding or replacing memory modules 43