HP ProBook 4435s HP ProBook 4435s Notebook PC and HP ProBook 4436s Notebook PC - Page 85
Speaker assembly
View all HP ProBook 4435s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
4. Lift the side of the board (3), slide it out from under the tab, and then remove the board from the computer. (4) Reverse this procedure to install the Quick Launch board. Speaker assembly Description Speaker assembly Spare part number 646364-001 Before removing the speaker assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 39). 5. Remove the following components: a. Bottom door (see Bottom door on page 40). b. Hard drive (see Hard drive on page 43) Component replacement procedures 77