HP ProBook 4445s Getting Started HP Notebook - Page 45
CAUTION, Replace the service door see
View all HP ProBook 4445s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
8. Insert a new memory module: CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. a. Align the notched edge (1) of the memory module with the tab in the memory module slot. b. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module (2) into the memory module slot until it is seated. c. Gently press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. CAUTION: To prevent damage to the memory module, be sure that you do not bend the memory module. 9. Replace the service door (see Removing or replacing the service door on page 31). 10. Replace the security screw, if desired (see Using the optional security screw on page 30). 11. Replace the battery (see Inserting or removing the battery on page 29). 12. Turn the computer right-side up, and then reconnect AC power and external devices to the computer. 13. Turn on the computer. Adding or replacing memory modules 37