HP ProBook 4720s HP ProBook 4520s Notebook PC and HP ProBook 4720s Notebook PC - Page 99
Peel the WLAN, Route the antenna cables
View all HP ProBook 4720s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
2. Remove the webcam cable (3)from the raceway and then, remove the cable assembly (4). NOTE: The cables are attached to the display panel with adhesive tape. To remove the WLAN and WWAN antennas: 1. Peel the WLAN (1) and WWAN (2) antenna receivers from the housing. 2. Route the antenna cables (3) out of the routing channels in the inside of the display housing. Reverse this procedure to install the display assembly. Component replacement procedures 91
2.
Remove the webcam cable
(3)
from the raceway and then, remove the cable assembly
(4)
.
NOTE:
The cables are attached to the display panel with adhesive tape.
To remove the WLAN and WWAN antennas:
1.
Peel the WLAN
(1)
and WWAN
(2)
antenna receivers from the housing.
2.
Route the antenna cables
(3)
out of the routing channels in the inside of the display housing.
Reverse this procedure to install the display assembly.
Component replacement procedures
91