HP ProBook 4740s Getting Started HP Notebook - Page 44
Removing or replacing the service door, Removing the service door
View all HP ProBook 4740s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Removing or replacing the service door CAUTION: To prevent information loss or an unresponsive system: Save your work and shut down the computer before adding or replacing a memory module or hard drive. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system. Removing the service door Remove the service door to access the memory module slot, hard drive, regulatory label, and other components. To remove the service door: 1. Remove the battery (see Inserting or removing the battery on page 33). 2. With the battery bay toward you, remove the security screw (1) (if the security screw is being used). For additional information about the security screw, see Using the optional security screw on page 35. 3. Slide the service door release latches (2) to release the service door. NOTE: You can slide the service door release latches simultaneously or you can slide them one at a time. 4. Slide the service door towards the front of the computer (3) and then lift it (4) away from the computer. 36 Chapter 5 Maintenance