HP ProBook 640 Maintenance and Service Guide - Page 79
WLAN module see, Top cover see
View all HP ProBook 640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement Before removing the RTC battery, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Remove the following components: a. Service door (see Service door on page 37). b. Remove the battery (see Battery on page 38) c. Hard drive (see Hard drive on page 39). d. Solid-state drive (see Solid-state drive (select products only) on page 41). e. WWAN module (see WWAN module (select products only) on page 42). f. WLAN module (see WLAN module on page 44). g. Optical drive (see Optical drive on page 46). h. Keyboard (see Keyboard on page 48). i. Hinge covers (see Hinge cover on page 55). j. Base enclosure (see Base enclosure on page 57). k. System board (see System board on page 59). l. Fan/heat sink assembly (see Fan and heat sink assembly on page 61). m. Top cover (see Top cover and TouchPad on page 65). To remove the RTC battery: ▲ If not already disconnected, disconnect the cable, and then remove the RTC battery. Component replacement procedures 69