HP ProBook 6545b HP ProBook 6545b, 6540b, 6445b and 6440b Notebook PC - Mainte - Page 88
WWAN module
View all HP ProBook 6545b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
WWAN module Removal and replacement procedures Description HSPA EV-DO WWAN module Spare part number 531993-001 Before removing the WWAN module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-7). 5. Remove the wireless module compartment cover (see "WLAN module" on page 4-16). Remove the WWAN module: Ä CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you replace the module and then receive a warning message, remove the module to restore computer functionality, and then contact technical support through Help and Support. 1. Position the computer with the front toward you. 2. Disconnect the WWAN antenna cables 1 from the terminals on the WWAN module. ✎ The red WWAN antenna cable is connected to the WWAN module "Main" terminal. The blue WWAN antenna cable is connected to the WWAN module "Aux" terminal. 3. Remove the two Phillips PM2.5×6.0 screws 2 that secure the WWAN module to the system board. (The WWAN module tilts up.) 4. Remove the WWAN module 3 by pulling it away from the slot at an angle. ✎ WWAN modules are designed with a notch 4 to prevent incorrect insertion of the WWAN module into the WWAN module slot. Maintenance and Service Guide 4-19