HP ProDesk 405 G1 Micro Illustrated Parts & Service Map ProDesk 405 G1 Mic - Page 2

Standard and Optional Boards System boards (includes AMD E1-2500 processor; includes replacement thermal material) * Models without Windows 8 729725-001 * Windows 8 Standard models 729725-501 * Windows 8 Professional models 729725-601 * NetClone models (China only) 745242-001 System boards (includes AMD A4-5000 processor; includes replacement thermal material) * Models without Windows 8 729726-001 * Windows 8 Standard models 729726-501 * Windows 8 Professional models 729726-601 * NetClone models (China only) 745241-001 System boards (includes AMD A6-5200 processor; includes replacement thermal material) * Models without Windows 8 736168-001 * Windows 8 Standard models 736168-501 * Windows 8 Professional models 736168-601 * NetClone models (China only) 745243-001 Memory modules (PC3-12800, CL11) * 8-GB 689375-001 * 4-GB 671613-001 * 2-GB 671612-001 Other boards * Nvidia NVS315 PCIe x16 graphics card, 1 GB 720837-001 * Nvidia NVS310 PCIe x16 graphics card, 512 MB 707252-001 * AMD Radeon HD8490 DP PCIe x16 graphics card, 1 GB 717219-001 * AMD Radeon HD8470 PCIe x16 graphics card, 2 GB (China only) 729085-001 * AMD Radeon HD8350 DH PCIe x16 graphics card, 1 GB DDR3 717220-001 * AMD Radeon HD8350 PCIe x16 graphics card, 1 GB DDR3 (China only) 729084-001 * Nvidia GeForce GT630 DP PCIe x16 graphics card, 2 GB 702084-001 * Intel PRO/1000 single port GbE NIC, includes bracket 728562-001 * Intel Dual Band Wireless-N 7260 802.11 a/b/g/n (2x2) Wireless NIC 745668-001 * Not shown Common POST Error Messages Screen Message 101-Option ROM Error 103-System Board Failure 164-Memory Size Error and 201-Memory Error 214-DIMM Configuration Warning 301-, 304-Keyboard error 501-Display Adapter Failure 1720-SMART Hard Drive Detects Imminent Failure Probable Cause 1. System ROM checksum error. 2. Expansion board option ROM checksum DMA, timers Incorrect memory configuration Populated DIMM configuration is not optimized Keyboard failure. Graphics display controller. Hard drive is about to fail. Recommended Action 1. Verify ROM, reflash if required 2. Remove suspected card, reboot 3. Clear CMOS memory, reboot 4. Replace system board 1. Clear CMOS memory. 2. Remove expansion boards. 3. Replace system board. 1. Run Setup (F10). 2. Check DIMMs for proper seating, type, and HP compatibility. 3. Remove DIMMs singularly and reboot to isolate faulty DIMM. 4. Replace system board. Rearrange the DIMMs so that each channel has the same amount of memory. Check keyboard connection or keys. Check connector for bent of missing pins. Replace keyboard. If 304, possible system board problem. 1. Reseat graphics card. 2. Clear CMOS. 3. Check monitor connection. 4. Replace graphics card. 1. Determine if hard drive is giving correct error message. Use F2 Diagnostics to run DPS Selftest. 2. Apply hard drive firmware patch if applicable. 3. Back up contents and replace hard drive. Miscellaneous Parts 1 Speaker 2 Fan 3 Parallel port, PCI card 4 Serial port, PCI card * Fan, BFR/PVC free * Card reader, 14-in-1, USB 3.0, 3.5-inch * Adapter, USB 3.0 to 2.0 * HP Ultraslim Keyed Cable Lock * Adapter, 2.5-inch hard drive * Hard drive grommet for use on 3.5-inch drives * Hard drive carrier, 2.5-inch to 3.5-inch * Hard drive adapter bracket, 2.5-in or 3.5-in hard drive in 5.25-in bay * WLAN antennas * Mouse, PS2, optical * Mouse, USB, HP Elite * Mouse, washable * Mouse, USB, optical * Mouse, USB, Portia *Not shown 745053-001 745052-001 638817-001 638815-001 748825-001 716390-001 736835-001 703372-001 586721-001 450712-001 703597-001 397117-001 583345-001 674315-001 674318-001 724795-001 674316-001 719901-001 Diagnostic LEDs LED Power Power Power Color White White Red Power Red Power Red Power Red Power Red Power Red Power Red Power Red Power Red Power Red none none LED Activity On 1 blink every 2 seconds 1 blink every second followed by a 2 second pause 3 blinks, 1 blink every second followed by a 2 second pause 4 blinks, 1 blink every second followed by a 2 second pause 5 blinks, 1 blink every second followed by a 2 second pause 6 blinks, 1 blink every second followed by a 2 second pause 7 blinks, 1 blink every second followed by a 2 second pause 8 blinks, 1 blink every second followed by a 2 second pause 9 blinks, 1 blink every second followed by a 2 second pause 10 blinks, 1 blink every second followed by a 2 second pause 11 blinks, 1 blink every second followed by a 2 second pause System does not power on and LEDs are not flashing State/Message Computer on Normal Suspend Mode CPU thermal shutdown Processor not installed Power failure (power supply overload) Pre-video memory error Pre-video graphics error System board failure (ROM Invalid ROM based on Checksum System powers on but is unable to boot Bad option card Current processor does not support a feature previously enabled. System unable to power on HP ProDesk 405 G1, Microtower 742430-001 page 2