HP ProLiant DL280 HP ProLiant DL288 G6 Server Maintenance and Service Guide - Page 85
To remove the memory module, CAUTION
View all HP ProLiant DL280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
To remove the memory module: 1. Completely open the holding clips securing the memory module. 2. Gently pull the memory module upward to remove it from the slot. Figure 50 Removing the Memory Module CAUTION: Place the memory module on a static-dissipating work surface or inside of an anti-static bag. To install the memory module: 1. Align the notch on the bottom edge of the memory module with the keyed surface of the DIMM slot and then fully press the memory module into the slot until the holding clips snap back in place. Figure 51 Installing the Memory Module CAUTION: The DIMM slots are structured to ensure proper installation. If you insert a DIMM but it does not fit easily into the slot, you may have inserted it incorrectly. Reverse the orientation of the DIMM and insert it again. Removal and replacement procedures 81