HP ProLiant DL360e Configuring Arrays on HP Smart Array Controllers Reference - Page 6
Support for standard configuration tasks, For more information about SAAP
View all HP ProLiant DL360e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Feature Where the utility can be used ACU Any machine that uses a supported browser CPQONLIN Only on the local server ORCA Only on the local server ORCA supports only basic configuration tasks, whereas CPQONLIN and ACU provide full-range support for standard configuration tasks (on page 6). ACU also provides support for advanced configuration tasks (on page 6). Some of these advanced tasks are not available in both ACU interface formats (GUI and CLI). Support for standard configuration tasks A "+" indicates the feature or task is supported. A "-" indicates the feature or task is not supported. Task ACU Create or delete arrays and logical drives + Assign a RAID level to a logical drive + Identify devices by causing their LEDs to illuminate + Configure SSP + Assign a spare drive to an array + Share a spare drive among several arrays + Assign multiple spare drives to an array + Specify the size of the logical drive + Create multiple logical drives per array + Set the stripe size + Migrate the RAID level or stripe size + Expand an array + Set the expand priority, migrate priority, and accelerator + ratio Extend a logical drive + Set the boot controller - *This task is supported only on the MSA1000 and MSA1500. CPQONLIN ORCA - - - + Support for advanced configuration tasks The following table uses these symbols: + -The ACU format supports this task. - -The ACU format does not support this task. +/- -Support for this task varies by controller. To support this task, some controllers must have SAAP activated by a registered license key. To identify controller-specific feature support and SAAP requirements, see the controller user guide or the HP website (http://www.hp.com/products/smartarray). For more information about SAAP, see "Smart Array Advanced Pack ("About SAAP" on page 8)." Overview of array configuration tools 6