HP ProLiant DL380 Implementing Microsoft Windows Server 2003 with Service Pack - Page 19

Issue 2 Issue 3 Issue 4 Issue 5 Issue 6 The Data Execution Prevention (DEP) feature in Windows Server 2003 SP1 causes the HP Insight Management Agents and the HP ProLiant Rack Infrastructure Service to stop running. Description If the Data Execution Prevention (DEP) feature is enabled in Microsoft Windows Server 2003 Service Pack 1 (SP1), it causes the HP Insight Management Agents for Windows Server 2003 and the HP ProLiant Rack Infrastructure Interface Service for Windows Server 2003 (this only affects ProLiant Server Blades) to stop running. For additional details, refer to the customer advisory located at http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID= PSD_EM050113_CW01. Solution Install Version 7.30A of the ProLiant Support Pack for Microsoft Windows Server 2003. Yellow exclamation mark gets displayed in ATI Device Manager with Remote Insight Lights-Out Edition installed. Description When using Remote Insight Lights-Out Edition, the Windows Server 2003 Device Manager displays a yellow exclamation mark beside the ATI device. Solution Please disregard the yellow exclamation mark as there is no loss of functionality or other reported symptoms to elicit concern. Hibernation issue exists with 4 GB or more system memory. Description The Hibernation tab does not install on servers with 4 GB or more system memory. Solution Hibernation with 4 GB or more system memory is not supported in Windows Server 2003. Embedded network interface controllers are not enumerated consistently. Description After installing and configuring embedded network interface controllers (NICs) post Windows Server 2003 installation, the port configurations may not operate as expected. Solution Switch cables if you are experiencing this situation. Dynamic disk drives attached to Compaq Fibre Channel HBAs disappear after "hot-swap." Description After hot removal and subsequent hot addition of the Compaq Fibre Channel Array or the Compaq Fibre Channel Host Controller /P (64-bit/66-MHz Fibre Channel Host Adapter) from one slot to another, the dynamic disk drive letters associated with the drives attached to the Compaq Fibre Channel Array or the Compaq Fibre Channel Host Controller /P are no longer listed in the Device Manager. Workaround Reboot the server for the correct dynamic disk drive letters to return. Solution Scheduled to be fixed in a later Microsoft operating system release. 19