HP ProLiant DL380G5-WSS HP StorageWorks 4400 Scalable NAS for Windows File Ser - Page 1

HP ProLiant DL380G5-WSS Manual

Get HP ProLiant DL380G5-WSS PDF manuals and user guides View all HP ProLiant DL380G5-WSS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 1 highlights

HP StorageWorks 4400 Scalable NAS for Windows File Serving quick start guide HP technical support For worldwide technical support information, see the HP support website: http://www.hp.com/support Before contacting HP, collect the following information: • Product model names and numbers • Technical support registration number (if applicable) • Product serial numbers • Error messages • Operating system type and revision level • Detailed questions © Copyright 2008 Hewlett-Packard Development Company, L.P. First edition: September 2008 The information in this document is subject to change without notice. Printed in the US www.hp.com AN59596001 System components The system is shipped with provisioned storage and a configured cluster that includes three filesystems. System components include: • EVA4400 dual controller • 4.8 TB to 38.4 TB of Fibre Channel storage; 4.8 TB to 88.4 TB of Fibre Channel and FATA storage • Three DL380 nodes, each with 12GB RAM • DL320 Command View server • Dual Fibre Channel switches • Network switch • Keyboard, Video, Mouse (KVM) switch • Command View EVA • Business Copy EVA for snapshots • Microsoft Windows Storage Server 2003 (64-bit mode) • HP Clustered File System and Volume Manager software System setup The following system setup is included in the Installation and Setup Service provided with your purchase: 1. Inspect the shipping crate for damage, unpack the system, and install it in the proper location. 2. Power up the power distribution unit (PDU). 3. Configure the Command View server. Set up the server, install Command View and the appropriate licenses, and verify network connections. 4. Verify factory settings. Power up the cluster servers, start the cluster software, and verify that the cluster filesystems are visible on all nodes. 5. Configure the customer network interface on the cluster servers and verify that the cluster network is visible. 6. Install the iLO license on each server. 7. Start HP Clustered File System on each cluster server. 8. Start the HP CFS Management Console and discourage administrative traffic from using the customer network interface. 9. Set passwords for the switches, CV server, and cluster servers. Also change the CV server password in the HP Clustered File System snapshot configuration. 10. Test the cluster, verifying that all servers can see files on the filesystems and can perform read and write operations. 11. Configure Virtual CIFS Servers or Cluster File Shares. Page 1

  • 1
  • 2
HP StorageWorks 4400
Scalable NAS for Windows File
Serving quick start guide
© Copyright 2008 Hewlett-Packard Development Company, L.P.
First edition: September 2008
The information in this document is subject to change without
notice.
Printed in the US
www.hp.com
AN59596001
HP technical support
For worldwide technical support information, see the HP support
website:
h
t
t
p
:
/
/
w
w
w
.
h
p
.
c
o
m
/
s
u
p
p
o
r
t
Before contacting HP, collect the following information:
•
Product model names and numbers
•
Technical support registration number (if applicable)
•
Product serial numbers
•
Error messages
•
Operating system type and revision level
•
Detailed questions
System components
The system is shipped with provisioned storage and a con
fi
gured cluster
that includes three
fi
lesystems. System components include:
•
EVA4400 dual controller
•
4.8 TB to 38.4 TB of Fibre Channel storage; 4.8 TB to 88.4 TB of
Fibre Channel and FATA storage
•
Three DL380 nodes, each with 12GB RAM
•
DL320 Command View server
•
Dual Fibre Channel switches
•
Network switch
•
Keyboard, Video, Mouse (KVM) switch
•
Command View EVA
•
Business Copy EVA for snapshots
•
Microsoft Windows Storage Server 2003 (64-bit mode)
•
HP Clustered File System and Volume Manager software
System setup
The following system setup is included in the Installation and Setup
Service provided with your purchase:
1.
Inspect the shipping crate for damage, unpack the system, and
install it in the proper location.
2.
Power up the power distribution unit (PDU).
3.
Con
fi
gure the Command View server. Set up the server, install
Command View and the appropriate licenses, and verify network
connections.
4.
Verify factory settings. Power up the cluster servers, start the cluster
software, and verify that the cluster
fi
lesystems are visible on all
nodes.
5.
Con
fi
gure the customer network interface on the cluster servers and
verify that the cluster network is visible.
6.
Install the iLO license on each server.
7.
Start HP Clustered File System on each cluster server.
8.
Start the HP CFS Management Console and discourage
administrative traf
fi
c from using the customer network interface.
9.
Set passwords for the switches, CV server, and cluster servers. Also
change the CV server password in the HP Clustered File System
snapshot con
fi
guration.
10.
Test the cluster, verifying that all servers can see
fi
les on the
fi
lesystems and can perform read and write operations.
11.
Con
fi
gure Virtual CIFS Servers or Cluster File Shares.
Page 1