HP ProLiant DL380p DVD-ROM and DVD-RW Drive Option Installation Instructions f - Page 1
HP ProLiant DL380p Manual
View all HP ProLiant DL380p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
DVD-ROM and DVD-RW Drive Option Installation Instructions for HP ProLiant DL360 G6 Servers Overview This document provides instructions for installing a SATA DVD-ROM or DVD-RW drive. When you install this drive, the server does not support the additional hard drive backplane. Kit contents • DVD-ROM or DVD-RW drive • DVD tray • T-10 screws (3) • SATA optical drive cable • This document Installing the DVD-ROM or DVD-RW drive 1. Power down the server, and then disconnect all power cords to remove power from the server. 2. Extend the server from the rack. 3. Remove the access panel. 4. Remove the dual hard drive bezel blank. 6. Secure the drive to the tray using the screw from this kit and the T-10/T-15 Torx screwdriver provided with the server. 7. Install the DVD tray using the screws from this kit and the T-10/T-15 Torx screwdriver provided with the server. 8. Remove the BBWC battery, if installed. 5. Install the optical drive in the DVD tray. © Copyright 2009, 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Part Number: 517695-002 March 2012 Edition: 2