HP ProLiant DL388e HP ProLiant and Integrity Firmware Management Best Practice - Page 20
directory. For example, if the static IP address used is 192.168.0.254
View all HP ProLiant DL388e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
1. Install the following packages: • tftp-server • dhcp • httpd • syslinux 2. Set up a DNS server on your network. 3. Activate TFTP within XINETD. • Change disable=yes to disable=no in /etc/xinet.d/tftp • Restart XINETD 4. Set up the PXE server to use a static IP: a. Create the file /etc/sysconfig/network-scripts/ifcfg-eth0.static b. Set the contents to the file as: DEVICE=eth0 BOOTPROTO=STATIC ONBOOT=no TYPE=Ethernet IPADDR= NETMASK= GATEWAY= 5. Set up the PXE boot environment: a. Copy initrd.img and vmlinuz from the /system directory of the SPP ISO to /tftpboot directory of the PXE system. b. Copy pxelinux.0 (PXE boot Linux kernel) to the /tftpboot directory. c. Ensure the files copied to /tftpboot are world readable. 6. Configure PXELINUX a. Create directory /tftpboot/pxelinux.cfg. b. Create files representing the hex value of the static IP address in the /tftpboot/ pxelinux.cfg directory. For example, if the static IP address used is 192.168.0.254, the hex value is C0A800FE and the files to be created would be: •C • C0 • C0A • C0A8 • COA80 • COA800 • C0A800F • COA800FE c. Create a zero-sized file (using touch) representing the MAC address of the NIC of the boot PXE boot client (pre-pended with 01 and replacing ':' with '-') in the /tftpboot/ pxelinux.cfg directory. For example, if the NIC MAC address were 00:01:02:03:04:05, a file name would be 01-00-01-02-03-04-05. 20 Deploying firmware