HP ProLiant DL590/64 Dynamic Power Capping TCO and Best Practices White Paper - Page 13
Appendix: TCO Test Configurations and Supported Servers
View all HP ProLiant DL590/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Appendix: TCO Test Configurations and Supported Servers The following tables contain the configuration of the servers as tested. Test Configuration 1-HP ProLiant DL380 G5 Server 1 HP ProLiant DL380 G5 server 2 Quad-Core Intel® Xeon® Processor E5450 8 1GB PC2-5300 DDR2 Fully Buffered Low-Power DIMMs 4 Hot Plug SFF SAS 10K 72GB Hard Drives in a RAID 5 Configuration 2 Power Supply Units ROM Revision: P56 9/1/08 iLO Revision: v1.70 pass 11 Power: 208VAC Circuit Size: 8.6kW (30 Amp, 3-phase) Operating Temperature: 22°C ±0.5°C Power calculated using HP Power Calculator REV111601 Power measured using Voltech PM1000 Power Analyzer Test Configuration 2-HP ProLiant BL460c G1 Server 16 HP ProLiant BL460c G1 Servers 2 Intel® Xeon® Processor L5450 4 4GB PC2-5300 DDR2 Fully Buffered Low-Power DIMMs 2 Hot Plug SFF SAS 10K 72GB Hard Drives in a RAID 1 Configuration ROM Revision: I15 iLO 1 HP BladeSystem c7000 Enclosure 10 Fans (Rev D, 48v) 6 Power Supply Units 2 HP 1Gb Ethernet Pass-Thru Modules 2 Onboard Administrator Modules Power: 208VAC Circuit Size: 8.6kW (30 Amp, 3-phase) Operating Temperature: 22°C ±0.5°C Power calculated using HP BladeSystem Sizer v3.4.1 Power measured using Voltech PM1000 Power Analyzer 13