Home » HP Manuals » Servers » HP ProLiant ML310e » Manual Viewer

HP ProLiant ML310e HP Scripting Toolkit 9.30 for Windows User Guide - Page 50

Using HPONCFG, HPONCFG command-line syntax - gen8 base system device

Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

You must then invoke the tool to load the contents of hba.ini input to the HBA NVRAM: hpqlarep /l hba.ini. Using HPONCFG HP offers support for the iLO features available on HP ProLiant servers with the HPONCFG utility. HPONCFG is an online configuration tool used to set up and reconfigure iLO without requiring a reboot of the server operating system. The utility runs in a command-line mode and must be executed from an operating system command line. HPONCFG enables you to initially configure features exposed through the RBSU or iLO. This utility is not intended for continued administration. CPQLOCFG should be used for ongoing administration of user rights and network functionality on the server. Before using HPONCFG, the iLO Management Interface Driver must be loaded on the server. HPONCFG displays a warning if the driver is not installed. For more information, see the HP iLO website at http://www.hp.com/go/ilo. Also, see the HP iLO 4 Scripting and Command Line Guide (for Gen8 servers) on the HP website at http://www.hp.com/go/proliantgen8/docs or the HP ProLiant Integrated Lights-Out 3 v1.20 Scripting and Command Line Guide (for G7 servers) on the HP website at www.hp.com/go/ilo. HPONCFG command-line syntax hponcfg [-help][-?][-reset][-f filename][-l filename] [-w filename][-get_hostinfo][-m firmwarelevel] IMPORTANT: Because the -w argument does not capture certain types of information, such as the administrator password, data files created with HPONCFG using the -w argument cannot then be used as input files for HPONCFG, unless they are modified first. HPONCFG command-line arguments Command-line argument -help or -? -reset -f filename -l filename -w filename -get_hostinfo -m -mouse Description These arguments display simple help messages. This argument resets the iLO to factory defaults. This argument sets the iLO configuration based on the information in the XML input file named filename. This argument logs replies to the text log file named filename. This argument writes the iLO configuration obtained from the device to the XML output file named filename. This argument returns the host server name and serial number. This argument indicates to HPONCFG the minimum firmware level that must be present in the management device to execute the RIBCL script. If the minimum level is not met, HPONCFG returns an error without performing any additional actions. This argument causes HPONCFG to configure the server for optimized mouse handling. NOTE: For a complete list of all command-line parameters, execute the /? utility. 50 Scripting Toolkit utilities

Section	Page
HP Scripting Toolkit for Windows User Guide	1
Contents	3
1 Introduction	6
Scripting Toolkit for Windows	6
Microsoft Windows Preinstallation Environment	6
Minimum requirements	6
2 Deployment using the Scripting Toolkit for Windows	7
Deployment overview	7
Sample deployment procedure	7
Creating a network share	8
Adding drivers to Windows PE 3.0	8
Adding drivers to Windows PE 4.0	9
Capturing a reference configuration from the source server	10
Configuring the target server and installing the operating system	11
3 Advanced topics	12
Overview	12
Customizing deployment scripts using HPDISCOVERY and IFHW	12
Querying the HPDISCOVERY file based on system name	12
Querying the HPDISCOVERY file to determine the presence of a particular card	12
Querying the HPDISCOVERY file to determine the presence of a card family	13
Booting Windows PE from a USB drive key	13
Flashing the ROM in a Windows PE environment	13
Erasing array configurations	15
4 Scripting Toolkit utilities	16
Syntax conventions	16
Utility online help	16
Using Scripting Toolkit utilities	16
Using REBOOT	17
REBOOT command-line syntax	17
REBOOT command-line arguments	17
REBOOT return codes	17
REBOOT command-line examples	17
Using SETBOOTORDER	18
SETBOOTORDER command-line syntax	18
SETBOOTORDER command-line arguments	18
SETBOOTORDER return codes	18
SETBOOTORDER command-line examples	18
Using STATEMGR	18
STATEMGR command-line syntax	18
STATEMGR command-line arguments	19
STATEMGR return codes	19
STATEMGR command-line examples	19
Using RBSURESET	19
RBSURESET command-line syntax	19
RBSURESET command-line arguments	19
RBSURESET return codes	20
Using HPDISCOVERY	20
HPDISCOVERY command-line syntax	20
HPDISCOVERY command line arguments	20
HPDISCOVERY return codes	21
HPDISCOVERY command line examples	21
Using IFHW	21
IFHW command-line syntax	21
IFHW command-line arguments	21
IFHW return codes	21
IFHW command line examples	22
Expression operators and terms	22
Expression examples	22
Using HWQUERY	23
HWQUERY command-line syntax	23
HWQUERY command line arguments	23
HWQUERY return codes	23
HWQUERY command-line examples	23
Using CONREP	24
CONREP command-line syntax	24
CONREP command line arguments	25
CONREP return codes	25
CONREP screen output	25
CONREP -s (Store to Data file) Example usage for HP ProLiant servers not using the Oxx ROM family	26
CONREP –l (Load from Data file) Example usage for HP ProLiant servers not using the Oxx ROM family	26
CONREP Data File Sample Contents for HP ProLiant servers not using the Oxx ROM family	26
CONREP command file contents	27
Using HPRCU	28
HPRCU command-line syntax	28
HPRCU command line arguments	28
HPRCU return codes	29
HPRCU sample XML format	29
Using HPACUSCRIPTING	29
Capturing a configuration	30
Using an Input script	30
Creating an ACU script file	31
Sample custom input script	31
Script file options	32
Control category	33
Action mode	34
Method mode	34
Controller category	34
Controller	34
ChassisName	35
ClearConfigurationWithDataLoss	35
LicenseKey, DeleteLicenseKey	35
PreferredPathMode	35
ReadCache, WriteCache	35
RebuildPriority, ExpandPriority	36
SSPState	36
SurfaceScanDelay	36
Video performance options	36
Array category	37
Array	37
Drive	37
DriveType	37
OnlineSpare	38
Logical Drive category	38
ArrayAccelerator	38
LogicalDrive	38
LogicalDriveSSPState	38
ParityGroups	39
PreferredPath	39
RAID	39
Sectors	39
Size	39
SSPAdaptersWithAccess	40
StripeSize	40
HBA category	40
ConnectionName	40
HBA_WW_ID	41
HostMode	41
ACU scripting error messages	41
Using HPLPCFG	45
HPLPCFG command-line syntax	45
HPLPCFG command-line arguments	45
HPLPCFG return codes	45
HPLPCFG command-line examples	46
Using LO100CFG	46
LO100CFG command-line syntax	46
LO100CFG command-line arguments	47
LO100CFG return codes	47
LO100CFG command-file contents	47
Using HPQLAREP	48
HPQLAREP command-line syntax	48
HPQLAREP command-line arguments	48
HPQLAREP return codes	49
HPQLAREP command-line examples	49
Using HPONCFG	50
HPONCFG command-line syntax	50
HPONCFG command-line arguments	50
HPONCFG return codes	51
HPONCFG command file contents	51
Obtaining an entire configuration	51
Obtaining a specific configuration	52
Setting a configuration	53
HPONCFG command-line examples	53
5 Troubleshooting	54
Troubleshooting table	54
6 Support and other resources	55
Information to collect before contacting HP	55
How to contact HP	55
Subscription service	55
Related information	55
Scripting Toolkit support	55
Typographic conventions	56
HP Insight Remote Support software	56
7 Documentation feedback	58
Acronyms and abbreviations	59

Match case Limit results 1 per page

You must then invoke the tool to load the contents of hba.ini input to the HBA NVRAM: hpqlarep

/l hba.ini.

Using HPONCFG

HP offers support for the iLO features available on HP ProLiant servers with the HPONCFG utility.

HPONCFG is an online configuration tool used to set up and reconfigure iLO without requiring a

reboot of the server operating system. The utility runs in a command-line mode and must be executed

from an operating system command line.

HPONCFG enables you to initially configure features exposed through the RBSU or iLO. This utility

is not intended for continued administration. CPQLOCFG should be used for ongoing administration

of user rights and network functionality on the server.

Before using HPONCFG, the iLO Management Interface Driver must be loaded on the server.

HPONCFG displays a warning if the driver is not installed.

For more information, see the HP iLO website at

tp://w

.hp

.co

m/go/ilo

Also, see the

HP iLO 4 Scripting and Command Line Guide

(for Gen8 servers) on the HP website

tp://w

.hp

.co

m/go/pr

n8/doc

or the

HP ProLiant Integrated Lights-Out 3 v1.20

Scripting and Command Line Guide

(for G7 servers) on the HP website at

.hp

.co

m/go/ilo

HPONCFG command-line syntax

hponcfg [-help][-?][-reset][-f filename][-l filename]

[-w filename][-get_hostinfo][-m firmwarelevel]

IMPORTANT:

Because the

-w

argument does not capture certain types of information, such as

the administrator password, data files created with HPONCFG using the

-w

argument cannot then

be used as input files for HPONCFG, unless they are modified first.

HPONCFG command-line arguments

Description

Command-line argument

These arguments display simple help messages.

-help or -?

This argument resets the iLO to factory defaults.

-reset

This argument sets the iLO configuration based on the

information in the XML input file named

filename.

-f

filename

This argument logs replies to the text log file named

filename.

-l

filename

This argument writes the iLO configuration obtained from

the device to the XML output file named

filename.

-w

filename

This argument returns the host server name and serial

number.

-get_hostinfo

This argument indicates to HPONCFG the minimum

firmware level that must be present in the management

-m

device to execute the RIBCL script. If the minimum level is

not met, HPONCFG returns an error without performing

any additional actions.

This argument causes HPONCFG to configure the server

for optimized mouse handling.

-mouse

NOTE:

For a complete list of all command-line parameters, execute the

utility.

Scripting Toolkit utilities