HP ProLiant SE2170s HP ROM-Based Setup Utility User Guide - Page 12

System Options menu The System Options menu options control basic I/O server configuration. Depending on your server model, options may include: • "Embedded NICs" (page 16) • "NIC Personality Options" (page 17) • "Advanced Memory Protection" (page 18) • "USB Options" (page 19) • "Processor Options" (page 24) • "Remote Console Mode" (page 38) • "NUMLOCK Power-On State" (page 40) • "SATA Controller Options (Gen8 servers with SATA controllers)" (page 41) • "HP Smart Array B320i RAID Configuration" (page 43) Serial Port options Depending on your server model, options may include: • "Embedded Serial Port" (page 12) • "Virtual Serial Port" (page 14) • "Embedded Serial Port Connector" (page 15) Embedded Serial Port The Embedded Serial Port option assigns the logical COM port number and associated default resources to the selected physical serial port. This setting may be overwritten by the operating system. Options include: • COM 1 (default for all servers except blades) • COM 2 (default for blade servers) • COM 3 • Disabled NOTE: The COM ports listed and the default setting vary depending on the server model. 12 RBSU menu-driven interface, version 3.xx or later (G6, G7, and Gen8 servers)