HP ProLiant SL160s Configuring SATA and SAS in HP ProLiant SL6000 servers - Page 5
SATA cables, SAS disk drive connectors.
View all HP ProLiant SL160s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
SATA cables LFF SATA drives are the default configuration for storage in the SL6000 and SATA cables are supplied with each server node. SAS cables Multi-drive cables connect SAS drives in the various configurations identified in the Table 1 cabling matrix. Each SL6000 server node hard drive configuration requires cables with specific cable lengths and connector types to permit adequate air flow and accommodate space restrictions within the server node. The example in Figure 2 shows a SAS cable with a straight Mini SAS connector and four SAS disk drive connectors. Figure 2. Example of SAS cable with a straight Mini SAS connector 4 3 2 1 Each of the SAS disk drive connectors is labeled with the number of the drive to be connected. Each SAS disk drive connector also has a power cable. The power cable uses the same number and is attached to the corresponding connector on the server node personality board. 5