HP ProLiant xw2x220c HP ProLiant xw2x220c Workstation Blade Maintenance and Se - Page 18
Remove the workstation blade
View all HP ProLiant xw2x220c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
IMPORTANT: Processor socket 1 must always be populated. If processor socket 1 is empty, the workstation blade does not power up. NOTE: Do not discard the processor protective cover. Always install the processor protective cover if the processor is removed from the socket. To remove the component: 1. Power down the workstation blade (on page 11). 2. Remove the workstation blade (on page 11). 3. Access the internal workstation components (on page 12). 4. Remove the heatsink. 5. Open the processor retaining latch and the processor socket retaining bracket. Removal and replacement procedures 18
Removal and replacement procedures
18
IMPORTANT:
Processor socket 1 must always be populated. If processor socket 1 is empty, the
workstation blade does not power up.
NOTE:
Do not discard the processor protective cover. Always install the processor protective
cover if the processor is removed from the socket.
To remove the component:
1.
Power down the workstation blade (on page
11
).
2.
Remove the workstation blade (on page
11
).
3.
Access the internal workstation components (on page
12
).
4.
Remove the heatsink.
5.
Open the processor retaining latch and the processor socket retaining bracket.