HP Q6377A User Guide - Page 53

Error messages, The photo printed with borders., Error message: Paper jam. Clear jam then press OK.

Page 53 highlights

The photo printed with borders. Solution The printing application installed on your device with Bluetooth wireless technology may not support borderless printing. Contact the vendor of the device, or go to their support web site to obtain the latest updates for the printing application. Error messages Before contacting HP Customer Care, read this section for troubleshooting tips or go to the online support services at www.hp.com/support. The following error messages may appear on the printer screen. Follow the instructions to resolve the problem. Error message: Paper jam. Clear jam then press OK. Solution To clear a paper jam, try the following: ● If the paper came part way through the front of the printer, gently pull the paper towards you to remove it. ● If the paper did not come part way through the front of the printer, try removing it from the back of the printer: - Remove the paper from the In tray, then pull down on the In tray to open it fully to a horizontal position. - Gently pull the jammed paper to remove it from the back of the printer. - Lift the In tray up until it snaps back into paper-loading position. ● If you cannot grasp the edge of the jammed paper to remove it, try the following: - Turn off the printer. - If the optional HP Photosmart Internal Battery is not installed in the printer, unplug the printer power cord. Wait about 10 seconds, then plug the power cord back in. - If the optional HP Photosmart Internal Battery is installed in the printer, unplug the printer power cord, if it is plugged in. Open the battery compartment cover and remove the battery. Wait about 10 seconds, then reinstall the battery. If desired, plug in the power cord. - Turn on the printer. The printer checks for paper in the paper path and will automatically eject the jammed paper. ● Press OK to continue. Error message: Automatic paper sensor failed. Solution The automatic paper sensor is obstructed or damaged. Try moving the printer out of direct sunlight, then press OK and try printing again. If this does not work, go to www.hp.com/support or contact HP Customer Care. HP Photosmart 330 series User's Guide 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69

The photo printed with borders.
Solution
The printing application installed on your device with Bluetooth
wireless technology may not support borderless printing. Contact the vendor of
the device, or go to their support web site to obtain the latest updates for the
printing application.
Error messages
Before contacting HP Customer Care, read this section for troubleshooting tips or go
to the online support services at
www.hp.com/support
.
The following error messages may appear on the printer screen. Follow the
instructions to resolve the problem.
Error message: Paper jam. Clear jam then press OK.
Solution
To clear a paper jam, try the following:
If the paper came part way through the front of the printer, gently pull the
paper towards you to remove it.
If the paper did not come part way through the front of the printer, try
removing it from the back of the printer:
Remove the paper from the In tray, then pull down on the In tray to open
it fully to a horizontal position.
Gently pull the jammed paper to remove it from the back of the printer.
Lift the In tray up until it snaps back into paper-loading position.
If you cannot grasp the edge of the jammed paper to remove it, try the
following:
Turn off the printer.
If the optional HP Photosmart Internal Battery is
not
installed in the
printer, unplug the printer power cord. Wait about 10 seconds, then plug
the power cord back in.
If the optional HP Photosmart Internal Battery is installed in the printer,
unplug the printer power cord, if it is plugged in. Open the battery
compartment cover and remove the battery. Wait about 10 seconds,
then reinstall the battery. If desired, plug in the power cord.
Turn on the printer. The printer checks for paper in the paper path and
will automatically eject the jammed paper.
Press
OK
to continue.
Error message: Automatic paper sensor failed.
Solution
The automatic paper sensor is obstructed or damaged. Try moving
the printer out of direct sunlight, then press
OK
and try printing again. If this does
not work, go to
www.hp.com/support
or contact HP Customer Care.
HP Photosmart 330 series User's Guide
47