HP Rp7410 ACSE/Presentation and ROSE Interface Programmer's Guide - Page 48
Prepare the System
View all HP Rp7410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Programming Guide 1. Prepare the System 1. Prepare the System Before you use the ACSE/Presentation interfaces, make sure that the following has been done: • Verify HP OTS/9000 h as been installed correctly. • Check that the presentation addresses, in particular, the local NSAP(s) used by the ACSE/Presentation applications that have been configured in the OTS configuration file. • Verify that HP OTS/9000 h as been started either manually using osiadmin or at start-up time. 48 Chapter 4
48
Chapter 4
Programming Guide
1. Prepare the System
1. Prepare the System
Before you use the ACSE/Presentation interfaces, make sure that the
following has been done:
•
Verify HP OTS/9000 h as been installed correctly.
•
Check that the presentation addresses, in particular, the local
NSAP(s) used by the ACSE/Presentation applications that have been
configured in the OTS configuration file.
•
Verify that HP OTS/9000 h as been started either manually using
osiadmin or at start-up time.