HP S9500 Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 -
HP S9500 - 19" CRT Display Manual
View all HP S9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP S9500 manual content summary:
- HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 1
Reference Guide CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 Document Part Number: 346224-002 January 2004 This guide provides information on setting up the monitor, installing drivers, using the onscreen display menu, troubleshooting, regulatory notices, and technical specifications. Enhanced - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 2
copyright. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. WARNING or loss of information. Reference Guide CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 Second Edition (January 2004) Document - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 3
Safety Information 2-1 Maintenance Guidelines 2-2 Removing the Monitor Base 2-4 3 Installation Attaching the Monitor Base 3-1 Setting Up the Monitor 3-2 Connecting the Speakers (Available with Select Models) 3-4 Attaching the JBL Speakers to the Monitor 3-5 Using the JBL Speaker Security Lock - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 4
Troubleshooting Solving Common Problems A-1 Using the Worldwide Web A-4 Preparing to Call Technical Support A-4 B Technical Specifications 5500/15" Series Monitor B-1 v72/17" Series Monitor B-3 mx704/17" Series Monitor B-5 7500/17" Series Monitor B-7 7550/17" Flat CRT Monitor Reference Guide - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 5
and easy-to-use product. It employs the latest on-screen menu technology. Kit Contents The monitor kit contains: CRT monitor Monitor Base (pre-attached on select models) Monitor AC power cord (select models) Speakers and power adapter (select models) Documentaion kit Reference Guide 1-1 - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 6
is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with your monitor, refer to the "Power Cord Set Requirements" section in Appendix C. outlet by grasping the plug firmly. Never pull on the cord. Reference Guide 2-1 - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 7
been dropped or damaged, first unplug from power oulet, then contact your Hewlett Packard authorized dealer, reseller, or service provider. Adjust only those controls that are discussed in the operating instructions. Place your monitor at least 3 inches (76 mm) away from walls or other enclosures - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 8
device. Install your monitor near an outlet monitor by using a screen saver program and turing off the monitor when not in use. Unplug your monitor clean your monitor or the top of your monitor. Water or monitor in a well ventilated area, away from excessive light, heat, or moisture. Keep your monitor - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 9
the Monitor Base In the event that you need to disassemble the base from the monitor, follow these instructions: 1. If you must remove the base attachment, release the catch and slide the base toward the back of your monitor. 2. Lift the base up and away from your monitor. 2-4 Reference Guide - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 10
3 Installation Attaching the Monitor Base On some monitors, the base must be attached prior to setting up the monitor. To attach the base: 1. Align the hooks on the base with the sockets on the bottom of the monitor and attach the base. Reference Guide 3-1 - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 11
base toward the front of the monitor until it stops. Setting Up the Monitor Before setting up the monitor, place it in a convenient, . 2. Connect the video cable (blue connector) 1 from the back of the monitor to the blue 15-pin connector on the back of the computer. Tighten the cable - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 12
. If your monitor fails to function properly, refer to Appendix A, "Troubleshooting." 5. If necessary, adjust the front panel monitor controls according to your personal preference. See "Front Panel Controls" for detailed information. Your monitor installation is now complete. Reference Guide 3-3 - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 13
the Speakers (Available with Select Models) To install the JBL or Harman/Kardon speakers: 1. Place the control speaker 1 and the other speaker 2 on either side of the monitor. 2. Attach the speaker power control speaker 1 to the green port on the back of the computer. 3-4 Reference Guide - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 14
To attach the JBL speakers to the sides of your monitor: 1. Rotate the thumbwheel, located on the side of the speaker, up to extend the speaker hook mechanism 2. Align the hooks with the slots in the monitor. 3. Gently insert the hooks into the slots and slide down into place. Reference Guide 3-5 - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 15
the sides of the monitor. To use the Speaker to the side of the monitor as described in the "Attaching the JBL Speakers to the Monitor." 3. Using a Phillips monitor. 5. Once the lock is in place in the side of the monitor, tighten the security lock screw to secure the speaker to the monitor - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 16
labeled Out, Line Out or Speaker. You may need to disconnect the speakers to connect the headphones. The speakers do not have a headphone port. Reference Guide 3-7 - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 17
A Troubleshooting Solving Common Problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions. Problem Possible Cause Solution Screen is blank. Power cord icons to adjust as needed. Move the object f arther away. Reference Guide A-1 - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 18
Troubleshooting Problem Possible Cause Solution Monitor may have been moved or inadvertently bumped. Press the SELECT button to access the On-Screen Display. Select Degauss to activate. Hewlett-Packard suggests you On-Screen Display. Select V. Position to adjust as needed. A-2 Reference Guide - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 19
Troubleshooting Problem Possible Cause Solution "No Signal" is displayed on screen. Monitor video cable is disconnected. Connect the 15-pin monitor video cable to the computer. Be sure that the computer power is on. "Out of Frequency" is displayed on screen. Video resolution and/or refresh - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 20
services, refer to the support Web site at: http://www.hp.com/support. Preparing to Call Technical Support If you cannot solve a problem using the troubleshooting tips in this section, you may need to call technical support. Have the following information available when you call: The monitor Monitor - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 21
specifications represent the highest specification of all HP's component manufacturers' typical level specifications for performance and actual performance may vary either higher or lower. 5500/15" Series Monitor resolution) 60 Hz (maximum resolution) 30 to 54 KHz 50 to 120 Hz Reference Guide B-1 - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 22
Technical Specifications (Continued) Max Pixel Clock Input Signal Video Cable Power Input Voltage Frequency Inrush Current Power Consumption 140o F -30o C to 60o C 20% to 80% (non-condensing) Up to 10,000 ft./3048 meters Select models meet TCO'99 Select models meet MPRII Yes B-2 Reference Guide - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 23
Technical Specifications v72/17" Series Monitor Screen Size 17" (43 cm) visual diagonal Viewable screen size 16" (40.6 cm) Dot Pitch 0.28 mm ( 100 W (Max.) Dimension (W x H x D) 16.6 x 17 x 17.5 inches (maximum) Unpacked w/attached base 410 x 432 x 445 mm (maximum) Reference Guide B-3 - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 24
Technical Specifications Weight Operating Temperature Storage Temperature Humidity Altitude TCO Requirements MPRII Plug and Play 38 lb Max. 17 kg Max. 50o F to 95o F 10o C to 35o C -22o F to 140o F -30o C to 60o C 20% to 80% (non-condensing) Up to 10,000 ft./3048 meters Select models meet TCO'99 - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 25
Technical Specifications mx704/17" Series Monitor Screen Size 17" (43 cm) visual diagonal Viewable screen size 16" (40.6 cm) Anti-Glare Coating Dot 100 W (Max.) Dimension (W x H x D) 16.1 x 17 x 17.4 inches (maximum) Unpacked w/attached base 410 x 432 x 442 mm (maximum) Reference Guide B-5 - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 26
Technical Specifications Weight Operating Temperature Storage Temperature Humidity Altitude TCO Requirements MPRII Plug and Play 42 lb Max. 19 kg Max. 50o F to 95o F 10o C to 35o C -22o F to 140o F -30o C to 60o C 20% to 80% (non-condensing) Up to 10,000 ft./3048 meters Select models meet TCO'99 - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 27
Technical Specifications 7500/17" Series Monitor Screen Size Dot Pitch Display Area Default Display Colors Display Resolutions 640 x 480 640 x 480 640 x 480 720 x 400 800 30 amps @ 120V 60 amps @ 220V 100 W (Max.) 16.6 x 17 x 17.5 inches (maximum) 410 x 432 x 445 mm (maximum) Reference Guide B-7 - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 28
Technical Specifications Weight Operating Temperature Storage Temperature Humidity Altitude TCO Requirements MPRII Plug and Play 38 lb Max. 17 kg Max. 50o F to 95o F 10o C to 35o C -22o F to 140o F -30o C to 60o C 20% to 80% (non-condensing) Up to 10,000 ft./3048 meters Select models meet TCO'99 - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 29
Technical Specifications 7550/17" Flat CRT Monitor Screen Size 17" (43 cm) visual diagonal Viewable screen size 16" (40.6 cm) Anti-Glare Coating Dot 100 W (Max.) Dimension (W x H x D) 16.1 x 17 x 17.4 inches (maximum) Unpacked w/attached base 410 x 432 x 442 mm (maximum) Reference Guide B-9 - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 30
Technical Specifications Weight Operating Temperature Storage Temperature Humidity Altitude TCO Requirements MPRII Plug and Play 42 lb Max. 19 kg Max. 50o F to 95o F 10o C to 35o C -22o F to 140o F -30o C to 60o C 20% to 80% (non-condensing) Up to 10,000 ft./3048 meters Select models meet TCO'99 - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 31
Technical Specifications 9500/19" Series Monitor Screen Size Dot Pitch Display Area Default Display Colors Display Resolutions 640 x 480 640 x 480 720 x 400 800 x 600 800 x 600 pin D-sub connector 100 to 240V AC 50 +3 to 60 +3 Hz 30 amps @ 120V 60 amps @ 220V 130 W (Max.) Reference Guide B-11 - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 32
Technical Specifications Dimension (W x H x D) Unpacked w/attached base Weight Operating Temperature Storage Temperature Humidity Altitude TCO to 60o C 20% to 80% (non-condensing) Up to 10,000 ft./3048 meters Select models meet TCO'99 or TCO'03 Select models meet MPRII Yes B-12 Reference Guide - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 33
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Hewlett Packard Company may void the user's authority to operate the equipment. User Guide C-1 - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 34
Or, call 1-800- 652-6672 For questions regarding this FCC declaration, contact: Hewlett Packard Company P. O. Box 692000, Mail Stop 510101 Houston, Texas 77269-2000 Or, call (281) 514-3333 To identify this product, refer to the Part, Series, or Model number found on the product. C-2 User Guide - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 35
): EN55022 (CISPR 22) - Electromagnetic Interference EN55024 (IEC61000-4-2,3,4,5,6,8,11) - Electromagnetic Immunity EN61000-3-2 (IEC61000-3-2) - Power Line Harmonics EN61000-3-3 (IEC61000-3-3) - Power Line Flicker EN60950 (IEC950) - Product Safety User Guide C-3 - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 36
, Hewlett Packard Company has determined that this product meets the Energy Star guidelines for energy efficiency. Specific details on using the Energy Saving features can be found in the energy saver or power management section of the computer manual. Power Cord Set Requirements The monitor power - HP S9500 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 - - Page 37
set (flexible cord or wall plug) received with the monitor meets the requirements for use in the country where you (3.6 m). If you have questions about the type of power cord to use, contact your HP authorized service provider. A power cord should be routed so that it is not likely to be walked
Reference Guide
CRT Monitors 5500, v72,
mx704, 7500, 7550, 9500
Document Part Number: 346224-002
January 2004
This guide provides information on setting up
the monitor, installing drivers, using the on-
screen display menu, troubleshooting, regulatory
notices, and technical specifications.
Enhanced for accessibility.