HP SN3000B HP B-series 16Gb Switches Hardware Reference Guide (5697-1522, Marc - Page 47

Environmental requirements, Table 12 HP SN3000B 16Gb FC Switch power supply specifications - btu

Page 47 highlights

Table 11 HP SN6000B 16Gb FC Switch power supply specifications (continued) Specification Values Inrush current Maximum of 50 A peak at 240 VAC for any initial current surge or spike of 10 ms or less at cold start up. Additional inrush current surges or spikes in the form of AC cycles, or multiple AC cycles greater than 10 ms and less than 150 ms, must not exceed 15 A peak. Single power supply output 150 W at 12 VDC Maximum current 12.5 A at 12 VDC Input line protection Both AC lines fused System power consumption 110 W with all 48 ports populated with 16 Gb/s SWL optical media 72 W with empty chassis and no optical media Table 12 HP SN3000B 16Gb FC Switch power supply specifications Specification Input voltage Input frequency Inrush current Single power supply output Input line protection System power consumption Values Range: 85-264 VAC, nominal: 100-240 VAC Range: 47-63 Hz; Nominal: 50-60 Hz Maximum of 35 A peak at 240 VAC for 10 ms or less 150 W at 12 VDC AC lines are fused 80 W with all 24 ports populated with 16 Gb/s SWL optical media 60 W with empty chassis and no optical media Environmental requirements Table 13 (page 47) lists the acceptable environmental ranges for both operating and nonoperating (such as during transportation or storage) conditions. Table 13 Environmental requirements Condition Ambient temperature Humidity Altitude Shock Vibration Airflow Acceptable range during operation 0º to 40ºC (32º to 104ºF) Acceptable range during nonoperation -25º to 70ºC (-13º to 158ºF) 10% to 85% RH non-condensing, at 40ºC (104ºF) 10% to 90% RH non-condensing, at 70ºC (158ºF) 0 to 3 km (9,842 ft) above sea level 0 to 12 km (39,370 ft) above sea level 20 G, 6 ms, half-sine wave 33 G, 11 ms, half-sine wave, 3/e.g. Axis 0.5 G sine, 0.4 gms random, 5-500 Hz 2.0 G sine, 1.1 gms random, 5-500 Hz Maximum - 71.36 cubic m/h (42 cubic ft/m) Nominal - 59.47 cubic m/h (35 cubic f/m) N/A Heat dissipation 338 BTU/hr (32-port configuration) 375 BTU/hr (48-port configuration) N/A Environmental requirements 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70

Table 11 HP SN6000B 16Gb FC Switch power supply specifications
(continued)
Values
Specification
Maximum of 50 A peak at 240 VAC for any initial current surge or spike of
10 ms or less at cold start up. Additional inrush current surges or spikes in
Inrush current
the form of AC cycles, or multiple AC cycles greater than 10 ms and less
than 150 ms, must not exceed 15 A peak.
150 W at 12 VDC
Single power supply output
12.5 A at 12 VDC
Maximum current
Both AC lines fused
Input line protection
110 W with all 48 ports populated with 16 Gb/s SWL optical media
System power consumption
72 W with empty chassis and no optical media
Table 12 HP SN3000B 16Gb FC Switch power supply specifications
Values
Specification
Range: 85–264 VAC, nominal: 100–240 VAC
Input voltage
Range: 47–63 Hz; Nominal: 50–60 Hz
Input frequency
Maximum of 35 A peak at 240 VAC for 10 ms or less
Inrush current
150 W at 12 VDC
Single power supply output
AC lines are fused
Input line protection
80 W with all 24 ports populated with 16 Gb/s SWL optical media
System power consumption
60 W with empty chassis and no optical media
Environmental requirements
Table 13 (page 47)
lists the acceptable environmental ranges for both operating and nonoperating
(such as during transportation or storage) conditions.
Table 13 Environmental requirements
Acceptable range during nonoperation
Acceptable range during operation
Condition
-25º to 70ºC (-13º to 158ºF)
0º to 40ºC (32º to 104ºF)
Ambient
temperature
10% to 90% RH non-condensing, at 70ºC (158ºF)
10% to 85% RH non-condensing, at 40ºC (104ºF)
Humidity
0 to 12 km (39,370 ft) above sea level
0 to 3 km (9,842 ft) above sea level
Altitude
33 G, 11 ms, half-sine wave, 3/e.g. Axis
20 G, 6 ms, half-sine wave
Shock
2.0 G sine, 1.1 gms random, 5–500 Hz
0.5 G sine, 0.4 gms random, 5–500 Hz
Vibration
N/A
Maximum - 71.36 cubic m/h (42 cubic ft/m)
Airflow
Nominal - 59.47 cubic m/h (35 cubic f/m)
N/A
338 BTU/hr (32-port configuration)
Heat dissipation
375 BTU/hr (48-port configuration)
Environmental requirements
47