HP Scanjet 8200c HP Scanjet 8200 series scanner - (English) Glass Cleaning Man - Page 8

Cleaning, reassembly, re-mount the top cover to the scanner

Get HP Scanjet 8200c PDF manuals and user guides View all HP Scanjet 8200c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

Cleaning clean the glass You are now ready to clean the underside of the glass. Use only glass cleaner. Avoid abrasives, acetone, benzene, and carbon tetrachloride, all of which can damage the scanner glass. Avoid isopropyl alcohol because it can leave streaks on the glass. Do not spray the glass cleaner directly on the glass. Do not allow the cleaner to seep between the glass and the plastic. If liquid gets between the glass and the plastic it could stain the calibration strip ( the white strip under the glass) and render your scanner useless. If the cleaner gets in the calibration strip area, the scanner must be sent to hp for repair. 10 Apply glass cleaner sparingly to a soft, lint-free cloth and clean the glass. reassembly re-mount the top cover to the scanner When you have finished cleaning the underside of the glass, reassemble the top cover. 11 Hold the top cover at an angle so that you can slide the front of the top cover on to the scanner first and then lower the rear. top cover being installed onto base

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
Cleaning
clean the glass
You are now ready to clean the underside of the glass.
Use only glass cleaner. Avoid abrasives, acetone, benzene, and carbon tetrachloride, all of
which can damage the scanner glass. Avoid isopropyl alcohol because it can leave streaks on the glass.
Do not spray the glass cleaner directly on the glass. Do not allow the cleaner to seep between
the glass and the plastic. If liquid gets between the glass and the plastic it could stain the calibration strip (
the white strip under the glass) and render
your scanner useless. If the cleaner gets in the calibration strip
area, the scanner must be sent to hp for repair.
10
Apply glass cleaner sparingly to a soft, lint-free cloth and clean the glass.
reassembly
re-mount the top cover to the scanner
When you have finished cleaning the underside of the glass, reassemble the top cover.
11
Hold the top cover at an angle so that you can slide the front of the
top cover on to
the scanner first and then lower the rear.
top cover being installed onto base