HP Scanjet G3000 User Guide - Page 19
Scanner will not turn on, Scanner does not scan right away, Buttons appear not to work
View all HP Scanjet G3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Scanner will not turn on If the scanner will not turn on when you press the front panel scanner buttons, check for these possible problems: ● The scanner may have been unplugged. Check to see that the power cable has not become disconnected from the scanner or unplugged from the power source. ● The scanner may be turned off. Check to see that the scanner power switch is in the On position. ● Check to see that the TMA cable has not become disconnected from the scanner. Scanner does not scan right away If the scanner has not been used for a while, the scanner lamp might need to go through a warm-up period before scanning can begin. If the scanner lamp needs to warm up, it takes a moment after starting the software or pressing a scanner button for scanning to begin. Buttons appear not to work After each step, start a scan to see if the buttons are working. If not, proceed with the next step. ● A cable might be loose. Ensure that the USB cable, the TMA cable, and the power cable are securely connected. ● Turn the scanner off using the power switch, and then turn it back on again. ● Restart your computer. ● The buttons might be disabled. Try the following procedure: - Open Control Panel, select Scanners and Cameras, and then select your scanner model from the list. - Open Properties, and then click the Events tab. From the Scanner events list, select Scan Document button press. - Ensure that the HP Scanning software option is selected. - Windows 98 and Windows 2000: Ensure that the Disable Device Events option is not selected. - Windows Me and Windows XP: Ensure the Take No Action option is not selected. User Guide 17