HP Scitex FB550 User Guide - Page 91
Clean the carriage wheels, System, Tools, User Cleaning and Maintenance, Clean Service, Station Wiper
View all HP Scitex FB550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
NOTE: Users of printers in California must disregard all references to the Printhead Flush or IPA in the instructions or when displayed on the control panel. Instead, the alternative cleaning liquid specified at the beginning of this section must be used. 1. Select from the control panel System > Tools > User Cleaning and Maintenance > Clean Service Station Wiper. 2. Press Proceed to continue. 3. Wear gloves, for example latex gloves, to protect your hands from ink. 4. Using a lint-free cloth saturated with printhead flush (do not use isopropyl alcohol), wipe both sides of the rubber wiper. Figure 10-12 Service-station wiper blade 5. To reset the maintenance counter for this task and complete the procedure, press Proceed. Clean the carriage wheels CMYKcm - 40 Hours CMYKW - 40 Hours Ink dust and debris can accumulate on the carriage wheels. These particles become obstacles and friction for the carriage wheels, which can cause repeating output anomalies on the printed media. NOTE: Users of printers in California must disregard all references to the Printhead Flush or IPA in the instructions or when displayed on the control panel. Instead, the alternative cleaning liquid specified at the beginning of this section must be used. There are eight carriage wheels to clean (A to H in the figure below). 84 Chapter 10 User cleaning ENWW