HP Scitex FB750 Site Preparation Checklist - Page 6

Table 7 Electrical Configuration Item Yes The printer should remain energized and powered on at all times to perform its automated printhead servicing. Do you need an Uninterrupted Power Supply (UPS) for the printer to prevent regular  loss of power to the printer? If yes, has a UPS with a voltage rating of 200-240VAC,  50/60Hz, a maximum current rating of 12 amps, and a minimum source of 3000VA been installed? Is the printer main power receptacle or printer UPS located within 1.5 m (5 ft.) of the service end of the printer, or 3.7 m (12 ft.) from  the user end of the printer? Has an uninterruptible power supply (UPS) with minimum 15 watts of backup power for the auxiliary vacuum power adapter been  installed? No    Comment (Required) Table 8 Networking and Computer Requirements Item Is the RIP computer and software ready for installation? Have network connections for printer and RIP computer been supplied? Do you have an external color sensor (calibrator) that is compatible with your RIP? Do you have a LAN cable long enough to connect the printer to the network? If you are using the Caldera RIP and you wish to take advantage of HP's Print Care remote-support features, you will require another networked computer that runs Microsoft Windows XP or Vista for installation of the PrintCare client software. Is such a computer available for use with Caldera and HP Print Care? Has the legal agreement for HP Print Care and CallMe@hp data gathering (see the last pages of this document) been signed? Yes No Comment    (Required) Table 9 Environmental Requirements Item Yes Does the designated space for the printer have a temperature- controlled environment that meets the specified operation  requirements listed in the Site Preparation Guide? Does the designated space for the printer have an environment that meets the specified humidity requirement listed in the Site  Preparation Guide? Have the temperature and humidity requirements been satisfactorily met in the materials storage area?  Is the print production area free from dirt and dust?  No    Comment (Required) 6