HP Scitex LX850 HP Scitex LX850 & LX820 Printers: Site Preparation Guide - - Page 20
RIP requirements, HP provided LAN/switch components, HP Scitex Onyx X10 RIP minimum configuration
View all HP Scitex LX850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Site preparation HP provided LAN/switch components ● 1-Gigabit Ethernet switch (must be set to autosense) and power cord ● HP Internal Print Server ◦ CPU and power cord ◦ Monitor and power cord ◦ Keyboard ◦ Mouse ◦ Windows Vista ◦ HP Internal Print Server software ● Two 1-Gb Ethernet cables Customer provided LAN/switch components ● Ethernet LAN (minimum 100Mb/s, optimum 1Gb/s) ● RIP station and software ● CAT-6 LAN cable long enough to connect the printer to the network NOTE: The port of the hub or switch to which the printer is connected must be configured as autosense. If it is set to any other protocol (such as half-duplex), there will be no communication. RIP requirements There are two RIPs offered by HP that may be used with the printer: ● HP Scitex Onyx RIP (Production House): product number CQ756A ● HP Scitex Caldera RIP (GrandRIP+): product number CQ755A The software and hardware requirements of these RIPs are as follows. HP Scitex Onyx X10 RIP (minimum configuration) ● Processor: ◦ Intel Core 2 Duo, Pentium IV 3GHz ◦ AMD Phenom, Athlon X2, Athlon 64 / Opteron 2GHz (with multiple RIPs, use a dual-core CPU or two single-core CPUs) ● Memory: 2GB RAM per CPU ● Hard disk drives: Two 80GB drives (SATA recommended) ● Monitor: 1280 × 1024 pixels, 16-bit color ● USB port for security key 16 Chapter 2 Site preparation ENWW