HP Slate 7 Plus 4200ca HP Slate7 Plus Tablet Maintenance and Service Guide - Page 13

Removal and replacement preliminary requirements, Tools required, Service considerations - case

Get HP Slate 7 Plus 4200ca PDF manuals and user guides View all HP Slate 7 Plus 4200ca manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

4 Removal and replacement preliminary requirements Tools required You will need the following tools to complete the removal and replacement procedures: ● Plastic case utility tool ● Flat-bladed screw driver ● Magnetic screw driver ● Phillips P00 screw driver Service considerations The following sections include some of the considerations that you must keep in mind during disassembly and assembly procedures. NOTE: As you remove each subassembly from the tablet, place the subassembly (and all accompanying screws) away from the work area to prevent damage. Plastic parts CAUTION: Using excessive force during disassembly and reassembly can damage plastic parts. Use care when handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions. Tools required 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
4
Removal and replacement
preliminary requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
●
Plastic case utility tool
●
Flat-bladed screw driver
●
Magnetic screw driver
●
Phillips P00 screw driver
Service considerations
The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
NOTE:
As you remove each subassembly from the tablet, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
CAUTION:
Using excessive force during disassembly and reassembly can damage plastic parts. Use
care when handling the plastic parts. Apply pressure only at the points designated in the maintenance
instructions.
Tools required
7