HP Spectre 13-v000 Maintenance and Service Guide - Page 40
TouchPad board, Remove the TouchPad board
View all HP Spectre 13-v000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
TouchPad board Description TouchPad board Spare part number 855632-001 Before removing the TouchPad board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 26). 5. Remove the battery (see Battery on page 28). Remove the TouchPad board: 1. Disconnect the TouchPad board cable from the system board (1). 2. Remove the three Phillips PM2.0×3.0 screws (2) that secure the TouchPad board to the computer. 3. Remove the TouchPad board (3). Reverse this procedure to install the TouchPad board. 34 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts