HP Split 13-m000 HP Split 13 x2 PC Maintenance and Service Guide - Page 75
Card reader, Disconnect the card reader cable
View all HP Split 13-m000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Card reader Description Card reader (includes cable) Spare part number 732283-001 Before removing the card reader, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Disconnect the tablet from the keyboard dock (see Releasing the tablet from the keyboard dock on page 32). 5. Remove the display rear cover (see Display rear cover on page 45). 6. Disconnect the battery cable (see Battery cable on page 46). 7. Remove the bottom trim (see Bottom trim on page 61). 8. Remove the audio board (see Audio board on page 64). Remove the card reader: 1. Disconnect the card reader cable (1) from the system board. 2. Remove the two Phillips PM2.0×4.0 screws (2) that secure the card reader to the tablet. 3. Lift the card reader from the tablet (3). Reverse these procedures to install the card reader. 66 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts