HP Sprocket Select Photo Printer User Guide - Page 6

Getting Started Installing Mobile App To use your HP Sprocket Select with your mobile device, you must download the companion sprocket app from the App Store or on Google Play™ (or your local app store). To download the sprocket app, visit hpsprocket.com/start. There, you will be directed to the appropriate app store for your device. • The sprocket app is supported by Android™ devices using OS v5.0 • Made for iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8, iPhone 8 Plus, iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s, iPhone 5c, iPhone 5, iPad Pro 12.9-inch (1st, 2nd and 3rd generation), iPad Pro 11-inch, iPad (4th, 5th, and 6th generation), iPad Pro 10.5-inch, iPad Pro 9.7-inch, iPad Air 2, iPad Air, iPad mini (2, 3, and 4), iPod touch (6th generation) • You must install the companion sprocket app to operate the HP Sprocket with your mobile device. • If you previously installed the sprocket app, you can access setup instructions for HP Sprocket Select in the Help & How To menu. Loading Paper 1. Take off the Paper Cover by lifting up. This will release the lid and allow you to lift off the Paper Cover to load paper. The lid is attached with magnets. 2. Unwrap a pack of HP Sprocket 2.3 x 3.4" (5.8 x 8.7 cm) Photo Paper (10 sheets). Make sure the included orange Print Quality Card is on the bottom of the stack with the barcodes and HP logo facing down. Stack the photo paper on top of the card with the HP logos facing down. The shiny side of the paper should be facing up in the tray. 3. Place both the paper and Print Quality Card into the Paper Tray. 4. Replace the Paper Cover to finish loading paper. You will feel the magnets latch the lid into place. Note: Make sure to slide the photo paper underneath the small tabs at the front end of the Paper Tray. Print Quality Card Use: Load the Print Quality Card with each new pack of paper. Each foil-pack has an included colored card; the card is specially-made to prepare your printer for the paper in that pack. The Print Quality Card cleans and calibrates the printer for the pack of paper that it came in. The card will pass through the HP Sprocket Select printer automatically after loading paper. If you notice print quality issues, load the colored card again. Discard the colored card after you have printed all ten sheets in the foil-pack. You will get a new Print Quality Card for the next pack of paper you load. 5