HP StorageWorks 1510i HP StorageWorks 1510i Modular Smart Array installation a - Page 109
Old Not Supported, Flashing Firmware
View all HP StorageWorks 1510i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Message Type 07 CLONE FIRMWARE? ''=YES User input 08 CONTROLLER TOO OLD NOT SUPPORTED Error 09 PILOT 2 CONTRLR NOT SUPPORTED Error 10 FIRMWARE FLASH FAILED Error 11 CLONING REFUSED SYSTEM HALTED Error 12 ONLINE UPGRADE FLASHING FIRMWARE 13 ONLINE UPGRADE FLASHING STARTED 14 ONLINE UPGRADE FLASHING DONE Informational Informational Informational 15 ONLINE UPGRADE FLASHING FAILED Error 16 ONLINE UPGRADE RESTARTING SYSTEM Informational 17 ONLINE UPGRADE COMPLETE Informational Description Action In dual-controller configurations only, the array controller has detected a firmware version mismatch with the two controllers and wants to copy the firmware from the other controller onto this controller. Firmware on both controllers must match. Scroll through and read the messages on both controller LCD panels to confirm the currently installed firmware versions on the controller. Then, respond appropriately to the prompt. < = No, do not clone. > = Yes, proceed with the cloning. No input = Yes, proceed with the clone. During a restart of the MSA chassis, the controller with the latest version of firmware is cloned. If a new or replacement controller is hot added, the firmware on the already installed and active controller is cloned, even if less recent. During startup, the firmware examines the hardware to ensure that it is supported for use with the version of installed firmware. This controller is not supported. Contact HP support. During startup, the firmware examines the hardware to ensure that it is supported for use with the version of installed firmware. This controller is not supported. Contact HP support. ROM flash failed. Download new firmware from the HP website and initiate the firmware update again. If the issue persists, contact HP support. A firmware mismatch was detected, message 07 CLONE FIRMWARE? ''=YES was displayed, and the user selected < for "No". Firmware on the controllers must be updated to be the same. An online firmware update is starting. An online firmware update is in progress. An online firmware update has completed. An online firmware update has failed. Download new firmware from the HP website and initiate the firmware update again. If the issue persists, contact HP support. An online firmware update is forcing an automatic restart of the system. An online firmware update has completed successfully. 1510i Modular Smart Array installation and user guide 109