HP StorageWorks 16-EL SAN Switch 2/16 version 3.1.x - Installation Guide - Page 65
Modifying Domain IDs, switch, if still available.
View all HP StorageWorks 16-EL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Installing the SAN Switch 2/16 Modifying Domain IDs Optional. Modify the domain IDs, if desired, as follows. Note: The default domain ID is 1. If the default domain ID is already in use when the switch is connected to the fabric, the domain ID for the new switch is automatically reset to a unique value. The domain IDs that are currently in use can be determined using the telnet command fabricShow. 1. Disable the switch by entering the following: switchDisable 2. Enter the following: configure 3. Enter y after the Fabric parameters prompt. Fabric parameters (y, n) 4. Enter a unique domain ID (such as the domain ID used by the previous switch, if still available). Domain: (1..239) [1] 3 5. Complete the remaining prompts (or press CTRL+D to accept the remaining settings without completing all the prompts). 6. Re-enable the switch by entering the following: switchEnable SAN Switch 2/16 Version 3.1.x Installation Guide 65