HP StorageWorks 1606 Brocade Fabric OS Troubleshooting and Diagnostics Guide v - Page 80
Correcting a fabric merge problem quickly, ATTENTION, TABLE 12
View all HP StorageWorks 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
9 Zone conflicts TABLE 12 Commands for debugging zoning (Continued) Command Function cfgEnable cfgSave cfgTransAbort cfgTransShow defZone licenseShow switchShow zoneAdd zoneCreate Use to enable and activate (make effective) the specified configuration. Use to save changes to the zone configuration database. Use to abort the current zoning transaction without committing it. Use to display the ID of the current zoning transaction. Sets the default zone access mode to No Access, initializes a zoning transaction (if one is not already in progress), and creates the reserved zoning objects. Displays current license keys and associated (licensed) products. Displays currently enabled configuration and any E_Port segmentations resulting from zone conflicts. Use to add a member to an existing zone. Use to create a zone. Before a zone becomes active, the cfgSave and cfgEnable commands must be used. zoneHelp Displays help information for zone commands. zoneShow Displays zone information. For more information about setting up zoning on your switch, refer to the Fabric OS Administrator's Guide. You can correct zone conflicts by using the cfgClear command to clear the zoning database. ATTENTION The cfgClear command is a disruptive procedure. Correcting a fabric merge problem quickly 1. Determine which switches have the incorrect zoning configuration; then, log in to the switches as admin. 2. Enter the switchDisable command on all problem switches. 3. Enter the cfgDisable command on each switch. 4. Enter the cfgClear command on each switch. 5. Enter the cfgSave command on each switch to commit the change. ATTENTION The cfgClear command clears the zoning database on the switch where the command is run. 6. Enter the switchEnable command on each switch once the zoning configuration has been cleared. This forces the zones to merge and populates the switches with the correct zoning database. The fabrics will then merge. 66 Fabric OS Troubleshoot and Diagnostics Guide 53-1001340-01