HP StorageWorks 1606 HP StorageWorks Fabric OS 6.3.0 release notes (5697-0358, - Page 50
Detected unexpected termination of Remote Procedure Call RPC
View all HP StorageWorks 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Fail to label tape w/ error: ERROR, SYS, Crypto tape receives service failure in tape_cmd_pre_execution_scsi_chk: PI BLK size > RBL, 0x0, Fixed in Fabric OS 6.3.0 tape_util.c, line: 5002. User entered FRU number via CLI is not being modified. Fixed in Fabric OS 6.3.0 Authentication is getting failed after 15 min if we configured external Fixed in Fabric OS 6.3.0 authentication like LDAP or Radius server. Tapepipelining code on PI side does not close exchange upon a ELS Fixed in Fabric OS 6.3.0 RJT response to REC -- "invalid oxid/rxid combo". Detected unexpected termination of Remote Procedure Call (RPC) daemon. Fixed in Fabric OS 6.3.0 Persistent IU pacing feature in 3rd party device trigger issues with tape Fixed in Fabric OS 6.3.0 emulation. During stress test overnight run of rekey and ISL disable/enable, the test tool exited on write failure to encrypted LUNs. Fixed in Fabric OS 6.3.0 Encryption SAN Switch goes to 'faulty' state after test cycle that alternately reboots each Encryption SAN Switch in the configuration every Fixed in Fabric OS 6.3.0 5 minutes. cp in slot 5 faulty. Fixed in Fabric OS 6.3.0 Mixing FibreChannel FastWrite (FCFW) and Non-FCFW flows can cause dcam entries to not be set correctly. Fixed in Fabric OS 6.3.0 I/O can not resume when jamming the status frame with IDLE with QOS enabled. Fixed in Fabric OS 6.3.0 ZONEd panic and VERIFYs due to shmInit: shmget failed: No space left on device. Fixed in Fabric OS 6.3.0 Workaround prior to code change: Reboot the switch. In IM2, mixed fabric with over 500 devices, nameserver counts do not match for FOS and EOSc switches in the same fabric. EOSn count Fixed in Fabric OS 6.3.0 matches FOS nameserver count. FCIP VE port: Fast recovery does not handle pure out of order packets. Fixed in Fabric OS 6.3.0 Firmwarecommit failed on Active CP with "missing /etc/fabos/skm/IngrianNAE.properties" Fixed in Fabric OS 6.3.0 Workaround prior to code change: Execute the following commands on both Active and Standby CPs after the problem has occured. cp /etc/fabos/skm/IngrianNAE.properties.template /etc/fabos/skm/IngrianNAE.properties firmwarecommit. Unable to launch Web tools on a DC SAN Director. Fixed in Fabric OS 6.3.0 File SW_v5_8.mib has internal notation that it is Version 5.7. Fixed in Fabric OS 6.3.0 CALD memory leak led to (CALD) memory leak led to switch panic / Fixed in Fabric OS 6.3.0 fabric disruption. 50