HP StorageWorks 2/12 HP StorageWorks Director and Edge Switch release notes (0 - Page 14
Important information
View all HP StorageWorks 2/12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
HAFM upgrade required for firmware 09.08.03 Consider the following HAFM requirements for firmware 09.08.03: • If you are using the 1U rack-mount HAFM Appliance to manage the Edge Switch or Director, the minimum HAFM version required is 08.09.01. This HAFM software is provided on the HP StorageWorks ha-fabric manager documentation and software CD (Part Number 516-000024-720). • This minimum version of HAFM allows you to manage Edge Switches or Directors running firmware version 09.08.03. However, to use all the new features and enhancements, upgrade to EFCM software 09.07.00. To migrate from HAFM to EFCM, you must first upgrade to HAFM 08.09.01. An upgrade kit to HAFM 08.09.01 is available (Part Number A7490A) for owners of a licensed version of HAFM. This HAFM upgrade is also available on the HP website: http://h18006.www1.hp.com/storage/networking/index.html Select Retired Products, navigate to your switch model, and then select Download drivers and software. Alternatively, you can perform the firmware upgrade directly to the Edge Switch or Director using the switch's HAFM Basic management interface. Contact your HP-authorized service representative to obtain a new HAFM version or to confirm compatibility with devices in your SAN before upgrading to this firmware. For more information on upgrading software versions, see the HP StorageWorks HA-Fabric Manager user guide. M-series and B-series switch interoperability For details on compatible firmware versions, management software EFCM or Data Center Fabric Manager (DCFM) Enterprise versions, and other requirements for M-series and B-series switch interoperability, see the latest application notes under Application Notes > Fabric Interoperability, available on the following HP website: http://www.hp.com/storage/spock Important information This section provides information that you should consider before using Edge Switches or Directors running firmware 09.08.03. SNMP reports wrong address If using SNMP, fcConnUnitLinkAgentAddressY should report the IP address of the HAFM or EFCM server if being managed by the application, or if not, should report the IP address of a neighboring switch in the fabric. Instead, a value of NULL or "0" is returned. Master log does not display port number For port offline and online messages in the Master log in HAFM or EFCM, the switch port number, switch WWN, and connected device (node) WWN should be included in the message. However, the switch WWN appears as the node WWN, and the node WWN is not included. 14